Seeking recommendations for intake/carb--

[jim7485]

I am planning to install a FRPP crate 302 engine in my 66 'vert. Part number is M6007-XE3 and uses the E303 cam. This page describes the engine/cam:
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=3791
First off, I think this is the best engine/cam for my application as this is a street cruiser, not a race car. If you have any other opinions, please post them. The car will have AOD and 3.55 Auburn trac loc. I'd like some ideas for the intake and carb setup as well.

Thanks
jim-

 

[Ares67Coupe]

For a reliable straight up set it once setup, I would look into an Edelbrock Square Bore Performer Series Carb #1406 which comes with an electric choke or #1405 with manual choke for your carb and for an intake a Weiland Stealth, Edelbrock Performer RPM, or Edelbrock Performer Air-Gap. Those should fit your needs quite well.