Setup recommendations

[J.parde450]

Hey every one.
If im not in the right place i apologize. I have a 92 hatch. Im curious as to recommendations for dialing in my setup.
The setup: stock block 5.0
E-street heads 2.02/ 190 runners
1.6 roller rockers
Trick flow track heat intake
B303
Ford racing 24 lb injectors
24 lb calibrated pro m maf
Msd pro billet dist/msd coil
Bbk long tubes into x pipe
Bbk c.a.i
Bbk throttle body
Walbro 255 pump.

My questions are as follow
Should i advance or retard the cam at all when i degree it.
What is every one setting their ignition timing at with a set up like this
Would dyno tuning be worth it on this setup.
Any guesses as to what kind of hp a setup like this will produce.

Im looking for some fun stop light to stop light and some extra juice coming out of corners.

Thankyou for your insight

 

[90sickfox]

Most alphabet camshafts will be set straight up. ( no advance or retard at the gear ). Most timing is set at 12° or 14°.

Dyno tuning is completely up to you. That's a pretty off the shelf build. A good tuner could squeeze the most out of it.

Tha almighty B camshaft. Most run them with 1.7 rockers. 1.6s will work and you'll still have a lope. Power is hard to say....maybe 280 rwhp.