• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Progress Thread Slow Progress On My "illegally Abused" 1988 Gt

  • Thread starter Thread starter Crazedstang
  • Start date Start date Sep 14, 2016
  • 1
  • 2
Next
1 of 2 Next Last

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 14, 2016
#1
  • Sep 14, 2016
  • #1
Hey guys and gals,

My name is David and I have been on here for a few months. I bought an abused 1988 GT Hatch back in February. I have had things come up that made me put this build off for a few months (kids' mom battles). Well I'm starting to get cracking on this pony again. Some have told me it isn't worth saving because of the rust and the shape it is in. Some idiot rattle canned in a horrid blue color. I has really bad rust in the frame rails that I will be fixing. I believe any fox that can be saved, should be saved. That is why I am not scrapping this car. It was originally Scarlet red on top with silver ground effects. When I bought the car as a roller it had no motor, trans, driveshaft, computer, fuel tank, and the wiring harnesses caught fire in the engine bay. The interior is in really good shape. Its gray and only has one rip on the side of the driver seat. Back seats look almost new. The car did come with some upgrades. Has upper and lower control arms in the rear, 3:73s, and springs. I don't know what kind of springs or control arms they are, all I know is they are red. Bout a month ago I have been gathering parts to start the build. I have the driveshaft in place with T5 and on saturday i will be picking up a 2000 explorer 5.0. I have bbk shorties and 140 speedo. This will be a slow build because of school and kiddos, but I will be posting progress as I go. I do have all the parts to switch over to the Ex 5.0 to build it.







Will post more as I go.
 
Reactions: RaggedGT, 90sickfox and Davedacarpainter

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Sep 14, 2016
#2
  • Sep 14, 2016
  • #2
Crazedstang said:
Hey guys and gals,

My name is David and I have been on here for a few months. I bought an abused 1988 GT Hatch back in February. I have had things come up that made me put this build off for a few months (kids' mom battles). Well I'm starting to get cracking on this pony again. Some have told me it isn't worth saving because of the rust and the shape it is in. Some idiot rattle canned in a horrid blue color. I has really bad rust in the frame rails that I will be fixing. I believe any fox that can be saved, should be saved. That is why I am not scrapping this car. It was originally Scarlet red on top with silver ground effects. When I bought the car as a roller it had no motor, trans, driveshaft, computer, fuel tank, and the wiring harnesses caught fire in the engine bay. The interior is in really good shape. Its gray and only has one rip on the side of the driver seat. Back seats look almost new. The car did come with some upgrades. Has upper and lower control arms in the rear, 3:73s, and springs. I don't know what kind of springs or control arms they are, all I know is they are red. Bout a month ago I have been gathering parts to start the build. I have the driveshaft in place with T5 and on saturday i will be picking up a 2000 explorer 5.0. I have bbk shorties and 140 speedo. This will be a slow build because of school and kiddos, but I will be posting progress as I go. I do have all the parts to switch over to the Ex 5.0 to build it.







Will post more as I go.
Click to expand...

Congrats on the purchase and good luck. If the control arms are tubular, they maybe the LMR house brand jobs. If they are box style then probably hotchkis which are pretty good quality. Those headers look like MAC ones which don't seal very well. BBKs have a one piece solid flange.
 

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 14, 2016
#3
  • Sep 14, 2016
  • #3
deathb4dismount said:
Congrats on the purchase and good luck. If the control arms are tubular, they maybe the LMR house brand jobs. If they are box style then probably hotchkis which are pretty good quality. Those headers look like MAC ones which don't seal very well. BBKs have a one piece solid flange.
Click to expand...
They are box style I believe. I will be doing some work on it tomorrow so i will take some pics of them. I will go look at the headers. My buddy told me they are BBK they have some kinda info on them so I will look at them.
 

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 14, 2016
#4
  • Sep 14, 2016
  • #4
Crazedstang said:
They are box style I believe. I will be doing some work on it tomorrow so i will take some pics of them. I will go look at the headers. My buddy told me they are BBK they have some kinda info on them so I will look at them.
Click to expand...

Good eye they are mac. Guess he didn't know what he had.
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Sep 15, 2016
#5
  • Sep 15, 2016
  • #5
Crazedstang said:
Good eye they are mac. Guess he didn't know what he had.
Click to expand...

I had those on my car before and swapped to BBK shorties. No more exhaust leaks.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Sep 15, 2016
#6
  • Sep 15, 2016
  • #6
Good lukc on your project. Tackling a car with that much rust in the shock towers, rails and torque boxes is questionable, but can be done if you have the time, talent, and money. I'd like to see some pictures of the inside and outside shock towers, rails, and torque boxes if possible. @Davedacarpainter - he's going through this with a few projects and is an experienced body man who can give you some advice as well

Do yourselff a favor and sell those headers. 1. they are equal length which are a PITA to install and change spark plugs. 2. They are MAC which have individual flanges and always are warped after taking them off a motor. I would get a set of used FRPP SS shorty headers. You can get them on CL or the Corral for around $100.
 
Reactions: Davedacarpainter and deathb4dismount

krazedstang

15 Year Member
Mar 23, 2009
670
278
104
Streamwood
Sep 15, 2016
#7
  • Sep 15, 2016
  • #7
Good luck with this, btw nice screen name lol.
 

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 16, 2016
#8
  • Sep 16, 2016
  • #8
mikestang63 said:
Good lukc on your project. Tackling a car with that much rust in the shock towers, rails and torque boxes is questionable, but can be done if you have the time, talent, and money. I'd like to see some pictures of the inside and outside shock towers, rails, and torque boxes if possible. @Davedacarpainter - he's going through this with a few projects and is an experienced body man who can give you some advice as well

Do yourselff a favor and sell those headers. 1. they are equal length which are a PITA to install and change spark plugs. 2. They are MAC which have individual flanges and always are warped after taking them off a motor. I would get a set of used FRPP SS shorty headers. You can get them on CL or the Corral for around $100.
Click to expand...
Yeah drivers side is horrible. Must have had a bad master cylinder leak and never cleaned it. I got the Macs up for sale right now and plan on going FRPP shorty headers. I will definately look him up for some guidance through the hard part of this project.

Thanks for the heads up
 

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 16, 2016
#9
  • Sep 16, 2016
  • #9
krazedstang said:
Good luck with this, btw nice screen name lol.
Click to expand...
hahahaha, very nice indeed lmao!
 
Reactions: krazedstang

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 16, 2016
#10
  • Sep 16, 2016
  • #10
deathb4dismount said:
I had those on my car before and swapped to BBK shorties. No more exhaust leaks.
Click to expand...

got to remember that I'm running P heads. Dont think the BBK shorties will work.
 
Reactions: N8Dogg98 and deathb4dismount

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 16, 2016
#11
  • Sep 16, 2016
  • #11
Well since I am waiting on tomorrow for the motor, I went ahead and sanded the car down and primered her black.
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Sep 16, 2016
#12
  • Sep 16, 2016
  • #12
Crazedstang said:
Well since I am waiting on tomorrow for the motor, I went ahead and sanded the car down and primered her black.
Click to expand...

Pics or didn't happen
 
Reactions: Davedacarpainter and krazedstang

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 16, 2016
#13
  • Sep 16, 2016
  • #13
deathb4dismount said:
Pics or didn't happen
Click to expand...


Tomorrow my Ex 5.0 shows up so I will be doing that all day.
 
Reactions: Boosted92LX

Chuckman

GTFO you fat, heavy bastard
15 Year Member
Oct 21, 2005
1,604
1,002
173
st. louis, mo
Sep 17, 2016
#14
  • Sep 17, 2016
  • #14
Crazedstang said:
got to remember that I'm running P heads. Dont think the BBK shorties will work.
Click to expand...
bbk's will work as long as you get plug wires with a 90 degree boot, and boot protectors. and don't plan on taking plugs out with the headers still on.....

but they do, technically, work.
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Sep 17, 2016
#15
  • Sep 17, 2016
  • #15
I ran BBK unequal shorties on my '95 with GT40P heads, and there was only one spark plug that took a trick to get it out. I can remember which cylinder number it was, but it wasnt that bad at all. Its been discussed many times, so I quick search and you will find the tricks to make it easy. Also, I highly recommend Remflex crushing gaskets for any headers you use. They are about $50 if I remember right, but are awesome, and you will never have to worry about an exhaust leak if running used (possibly warped) headers. I have used them on three projects with used headers, and never had one leak.
 

skyline247

Advanced Member
Jul 28, 2014
816
225
73
Cincinnati, OH
Sep 17, 2016
#16
  • Sep 17, 2016
  • #16
It's a rough starting point but I'm looking forward to your progress. Good luck!

Sent from my Nexus 6 using Tapatalk
 

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 19, 2016
#17
  • Sep 19, 2016
  • #17
95BlueStallion said:
I ran BBK unequal shorties on my '95 with GT40P heads, and there was only one spark plug that took a trick to get it out. I can remember which cylinder number it was, but it wasnt that bad at all. Its been discussed many times, so I quick search and you will find the tricks to make it easy. Also, I highly recommend Remflex crushing gaskets for any headers you use. They are about $50 if I remember right, but are awesome, and you will never have to worry about an exhaust leak if running used (possibly warped) headers. I have used them on three projects with used headers, and never had one leak.
Click to expand...

These are the Mac shorties. He thought they were BBK, but come to find out they aren't. So I dont think they are going to work. Thanks for the info on the header gaskets. I will definately be looking into them.
 

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 19, 2016
#18
  • Sep 19, 2016
  • #18
skyline247 said:
It's a rough starting point but I'm looking forward to your progress. Good luck!

Sent from my Nexus 6 using Tapatalk
Click to expand...

Yes it is a very rough start, but I refuse to let this fox go to the crusher becasue of the shape it is in. It has frame rail rot and I will have that repaired before the motor goes in. Thanks for the good luck.
 
Reactions: skyline247 and Davedacarpainter

Crazedstang

Active User
Sep 18, 2013
50
12
19
Sep 22, 2016
#19
  • Sep 22, 2016
  • #19
Gt40p heads all cleaned and ready for paint.

Little piston cleaning

Not a good sign
 
Reactions: Davedacarpainter

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Sep 22, 2016
#20
  • Sep 22, 2016
  • #20
Crazedstang said:
Gt40p heads all cleaned and ready for paint.

Little piston cleaning

Not a good sign
Click to expand...
Got a little bit of gunk in there, huh?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

The Dilemma! 1988 LX 5.0
  • TTSaleen
  • Sep 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
343
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2025
Noobz347
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
937
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
570
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
197
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
764
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?