small air cleaner???

P

panteramatt

Member

Mar 5, 2004

31

0

6

Jul 26, 2005

#1

• Jul 26, 2005

• #1

I need a air cleaner thats pretty small in size cause when I close my hood, I notice there isnt much room at all. I want one that will work with the scoop to get more air. I remember seeing a small triangle one with a mesh top but dont know where to get it?

 

94CobraPace

Founding Member

Aug 30, 2000

907

1

0

Houston, Tx.

Jul 26, 2005

#2

• Jul 26, 2005

• #2

Edelbrock has a small triangle one with foam on the inside, check here: http://www.edelbrock.com/automotive_new/mc/accessories/ac_access.shtml
I don't really like those foam type air cleaners. I've seen the foam deteriate & when it does guess where it goes? And if you ever have a carb back fire = more bad news.
Better to get a dropped base with a thin filter.

 

jes72mustang

New Member

Mar 31, 2005

224

1

0

S. Central PA

Jul 26, 2005

#3

• Jul 26, 2005

• #3

I agree with 94 Cobra, look for a drop base air cleaner rather than the foam type.

 

brianj5600

Active Member

Sep 19, 2003

1,964

2

39

Middle TN

Jul 26, 2005

#4

• Jul 26, 2005

• #4

Make it three. How close is the carb to the hood? What intake, motor, year car? People with the same combo might be able to give specific combos that work.

 

P

panteramatt

Member

Mar 5, 2004

31

0

6

Jul 26, 2005

#5

• Jul 26, 2005

• #5

Thats the intake that I was looking for but I dont like foam filters either. I have a 69 mach1 with a 351 with a victor jr intake and holly carb and Id really like a air filter that would work with the hood scoop and thats the onlt one I can think of. Theres hardly any room for an air filter and it cuurntly doesnt have one which isnt good. Where can I get one of these recessed ones?

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Jul 26, 2005

#6

• Jul 26, 2005

• #6

I modified a stock air cleaner base by removing the snorkel, blocking it with a home made delete plate amd drilling three 1/4" drain holes. Works well with scoop.

 

Attachments

• 78317341307_0_ALB[1].webp

  32.8 KB · Views: 257

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Jul 26, 2005

#7

• Jul 26, 2005

• #7

Forgot to mention, a 14" aircleaner with cheap chrome lid replaces the stock filter and lid.

 

G

grego37

New Member

May 12, 2004

576

0

0

Fresno CA

Jul 26, 2005

#8

• Jul 26, 2005

• #8

agreed, stay away from foam type elements.
I too have basically no room between my carb and hood, but was able to fit a k&n 14x3 with a drop base.
look into:
Moroso
Mr Gasket
Holley?
or search google for "spun aluminum air cleaner"

 

94CobraPace

Founding Member

Aug 30, 2000

907

1

0

Houston, Tx.

Jul 26, 2005

#9

• Jul 26, 2005

• #9

Forgot to mention, the foam filters do not flow well either.

 

3

351carlo

New Member

Mar 9, 2004

267

0

0

Philadelphia

Jul 26, 2005

#10

• Jul 26, 2005

• #10

Anything with Small and Air isn't a good thing. When building a motor, you want to allow a free flow of air, be it intake or exhaust. (Lets not start the debate on free flowing exhaust here....)

Be sure that with whatever you get, it flows enough to keep up with your motor. The one thing I hate seeing is a guy with a 1050 dominator, and yet he's running one of those foam Edelbrock air cleaners on his show car. They don't flow enough to keep up with the motor, so you're trying to basically breathe through a straw... it doesnt work.

My suggestion would be a drop intake 14 inch, with an open top as shown above. Make sure it is big enough to flow that which your motor demands.

 

MustangMatt1966

New Member

Mar 11, 2004

1,004

1

0

Orlando Fl.

Jul 26, 2005

#11

• Jul 26, 2005

• #11

how bout gettin a cowl hood and then gettin a k&n extreme air cleaner..thats what i did

 

Capt Dan

New Member

Mar 31, 2005

237

0

0

College Station, Texas

Jul 26, 2005

#12

• Jul 26, 2005

• #12

Or build your own from these K& N parts from summit:

14" flow thru lid + 1.25" drop base

 

Attachments

• knn-85-3549_w.webp

  5.5 KB · Views: 112
• knn-66-1401xp.webp

  19.4 KB · Views: 113

P

panteramatt

Member

Mar 5, 2004

31

0

6

Jul 26, 2005

#13

• Jul 26, 2005

• #13

I like the oval air cleaner with the COBRA printed on top cause that would match my vlave covers. Do they make a drop air cleaner in this style?

 

shotsy

New Member

Apr 8, 2005

233

0

0

Oklahoma City

Jul 26, 2005

#14

• Jul 26, 2005

• #14

One god back fire and you'll need the extinguisher to put it out, stay away from that foam one

 

hungrymonkey

White by Birth, Trash By Choice

Founding Member

Nov 29, 1999

3,077

12

108

Oregon.

Jul 26, 2005

#15

• Jul 26, 2005

• #15

I ran the foarm edelbrock for awhile. It worked ok, but I did have a backfire and all it did was melt a big hole in it.


a few years ago I read an article about air cleaner size and hp gain/loss. They took a motor and dyno'd it with several different sizes of k&N filters.

believe it or not, but the smallest filter they used made the most HP.

they theorized that it kept the air from becoming turbulent.

I doubt I still have the magazine, but I will look.

 

3

351carlo

New Member

Mar 9, 2004

267

0

0

Philadelphia

Jul 27, 2005

#16

• Jul 27, 2005

• #16

hungrymonkey said:

a few years ago I read an article about air cleaner size and hp gain/loss. They took a motor and dyno'd it with several different sizes of k&N filters.

believe it or not, but the smallest filter they used made the most HP.

they theorized that it kept the air from becoming turbulent.

I doubt I still have the magazine, but I will look.

Click to expand...

I find that extremely hard to believe. Thats like saying use smaller ports because the air will become less turbulent. Besides, the air is entering at all sorts of angles through the air cleaner, that do not directly correlate to the direction which it flows into the venturis of the carburetor, which could not translate to the turbulence felt there.

I'm just not seeing the possibilities. I've read many a magazine where they've choked out a motor with a small paper cleaner, and then added a K&N. More flow= More power.

 

67coupestang

Founding Member

May 31, 2002

509

2

19

Jul 27, 2005

#17

• Jul 27, 2005

• #17

hungrymonkey said:

a few years ago I read an article about air cleaner size and hp gain/loss. They took a motor and dyno'd it with several different sizes of k&N filters.

believe it or not, but the smallest filter they used made the most HP.

they theorized that it kept the air from becoming turbulent.

I doubt I still have the magazine, but I will look.

Click to expand...

i rember that same article. they also claimed that not running an air filter made the worst HP. the speculated exactly what Hungrymonkey said. the base helped funnel the air in and reduced turbulance. I dont rember what they used for a test motor, but i dont think it was anything big. and your engine can only pull in as much air as its setup to do, Cam, heads, intake, carb, and cubes.