how is everyone doing, the problem that I am running into might be simple but honestly I am not an engine specific guy, I have a 66 mustang coupe, has a c6 tci super street fighter in it, also I put a PAW SB 427 in it, I know that this is an older kit but I was stationed in Germany for a while and a divorce so car sat for a while. know the issue I am trying to fix is my power curve is way left, and rev max is only about 5200, with a sharp drop of, I would like to shift it to the right currently I am peak torque at 3800 with 523 and peak HP of 430 at 4700. I was talking with a buddy and he suggested different heads and maybe a different cam. I know stroker engines tend to be non rev motors and high torque, I just would like to know if I can adjust it a little more for the top end. currently my cam is a comp cam camshaft 240/246. 541/544/110 lash. my heads are running RHS iron heads that are runners 200c, chambers 58cc, valves 2.02/ 1.600 with valve train max lift of .560. any info is appreciated