sn95 rear brakes on my fox HELP...

[rightonbuzz]

I am converting to sn95 rear brakes on my 89 notch. I am still wanting to use stock master cylinder. I have seen a plug (sold by ford racing) that goes into the stock distribution block located under the master cylinder. I am wanting to do this conversion as cheaply as possible. I don't plan on racing this car or anything I just want the brakes to work well.

Thanks for any advice.

 

[BDASPNY]

i'm not sure about an ford racing part but i know you can go to maximum motorsports and get a piece to bypass the org part so you can use the adj valve.

 

[1991vert]

you need to remove the stock prop. valve in the distribution block and then use the ford racing plug.

 

[clayschmuck]

I am converting to sn95 rear brakes on my 89 notch. I am still wanting to use stock master cylinder. I have seen a plug (sold by ford racing) that goes into the stock distribution block located under the master cylinder. I am wanting to do this conversion as cheaply as possible. I don't plan on racing this car or anything I just want the brakes to work well.

Thanks for any advice.

I found this guy on ebay...he had all the strange and wierd parts you'll need to complete your upgrade. I Just finished my upgrade and everything worked just the way is was supposed to!!!

http://stores.ebay.com/Tech-Parts-Plus-More

Clay