So i snapped my ebrake cable
- Thread starter RsStanG1987
- Start date
srothfuss
Last night I stabbed the same guy 7 times in a row
The one that attaches to the E-brake or one (of the two) that go to each of the rear wheels?
You can probably get those parts from Cjpony parts or at a J/Y. I haven't seen them on 5.0resto or year one.
You can probably get those parts from Cjpony parts or at a J/Y. I haven't seen them on 5.0resto or year one.
If its the one that attaches to the handle itself, that's not a big deal to fix. But it's a PITA to remove and install the individual cables that go to each wheel. I didn't enjoy that when I did my 5-lug conv.
DTT92LX
New Member
It's an easy replacement. Just check the hanes manual while your at the store getting the cable. There are 2 slightly different procedures to follow depending on the year of the car.
mustangsally93
New Member
Hey while on the topic I lowered my stang and now my e brake rubbs my drive shaft maybe some one can help me too? It the cable housing that hold the cables to the handle in the car.
I lowered my car 2 inches and it diddnt matter. Maybe you need a new cable too.mustangsally93 said:
Back On topic. I guess i have to take the consel apart to fix this.
srothfuss
Last night I stabbed the same guy 7 times in a row
I haven't done a e-Brake cable switch-a-roo but to get good easy acess to the brake lever, the console has to come off.... It's not too hard to take out though.
Maybe while you have it out you can repair your ashtray door spring (if it's broken)
Maybe while you have it out you can repair your ashtray door spring (if it's broken)
Similar threads
