So who is turning things up a notch this year?

Nik_95Cobra · Dec 3, 2006

Bens95cobra8594 said:
Good luck to anyone who can do something away from the normal stuff we see ALL the time on the site:

Exhaust, HCI, 306, 331, 347, 408, 418, underdrive pulleys, Tweecers, hoods, bodykits, superchargers and turbos, nitrous, gears and whatever and my personal favorites: "Hey everyone, LOOK, new rims that are EXACTLY the same as the other 15 varieties out there for Mustangs, that everyone else already has! They sure do look different on my car though."

It's sort of the same recycled stuff over and over again.

I'd love to see something different and unique... like an AWD 'Stang or a quad turbo 'Stang or really wild. Bounce ideas around and see what comes out...

Maybe someone will do a B16 swap in one of their stangs, or have some Integra LS wheels redrilled to fit one of our 94-95's.

69clark · Dec 3, 2006

Not too much here. I would like to put on a hogan sheetmetal intake, some custom upholstery in the interior, maybe a custom sound system (nothing crazy, just a simple, clean, custom install) and some small tinking stuff.

I may get a powder coating setup and do some of my own stuff, we'll see.

Pokageek · Dec 4, 2006

Alright, if everyone here sends me $500 each then I promise to do something out of the ordinary to my car, lol.

BlackVert · Dec 4, 2006

SeventyMach1 said:

Pokageek said:
I vote blackvert. He's going killer combo...meaning faster than 306, 331, 347, 392, etc...

thanks guys. btw, this thing will also have an aje k-member, kooks headers, march brackets, polished alt and a/c, tremec tranny, and i am looking into deep dish fr500s.

4Jenna · Dec 4, 2006

He dont want none of Big Eades new 07' combo

urban96 · Dec 4, 2006

eades combo

you still have a stock block in there?

ProKiller · Dec 4, 2006

eades5.0 said:
He dont want none of Big Eades new 07' combo

i know i don't

GreenMustangGt said:
i might get paint.....

That'll be the day

can't say i'm really doing anything extreme or big. I'm just mostly collecting parts to get me more towards where i want to be. wide band, chasis stiffening, methonal kit, 17x10 wheels w/ MT ET streets....

gcomfx.com · Dec 4, 2006

Big combo for me... but not for everyone else.

4Jenna · Dec 4, 2006

gcomfx.com said:
Big combo for me... but not for everyone else.

What a supersized #2 combo?

gcomfx.com · Dec 4, 2006

While a two cheeseburger combo is a good one.... LOL - the one I'm referring to is in my sig. ;-)

Killercanary · Dec 4, 2006

BlackVert said:
paul, tell us about your project, or is it a secret?

Its a semi-secret. LOL! No, really this is what I have going on so far. As I buy more things and make more decisions I'll post them up. I'm really undecided about a lot of things still, so I'll only post about parts already purchased. It will be NA though.

Here's my newest addition I picked up this weekend. Out with the old, in with the new:

I also picked these up. I'm not sure if I'm going to use them or not, but the price was too good to pass up.

In addition, most of you know I also built a fully forged dart sportsman based shortblock that is internally balanced. I'm still running my old FTI cam, but it will probably be degree'd a little differently than before... I want more RPM out of this one. I'm also going to be running a fidanza aluminum flywheel with my old pro motion Kustom clutch.

If money allows I'd also love to get my new heat extractor hood, cervini's stalker front fascia, ABC saleen style side skirts, and more than likely a saleen rear bumper on the car and painted. I have everything except for the rear bumper cover. If I don't do this I may get a legal roll bar put in the car so I can run it legally this year without having people bitch about my safety equipment. I'm thinking I may have to get the hood on if nothing else so that it'll clear the holley. i'd like to run a 3/8" phenolic spacer on it and I know it won't fit under the stock hood without modification.

That's it for now, but there will be more coming shortly. This car WILL be back on the road by spring after being down for 2yrs. Man do I have a TON left to do and a lot of decisions left to make.

NeverFastEngh · Dec 4, 2006

I am almost done putting my 408 together. SVO 4 bolt block, eagle rotating assembly, AFR 225s, Edelbrock super victor direct port intake, Holley 750 DP, and an 88mm turbo. Backed with a twin disc clutch, Viper T-56, 9in rear, new fuel system, ALL autometer guages (no cluster or comp), New paint, and clear licence plate cover.

Taking the 357 EFI engine out and using it as a table or something. I am tired of efi for now so i will see what happens with a blow through carb turbo setup.

Killercanary · Dec 4, 2006

Neverfastenough- DAMN, that sounds like one wicked ass combo. I've seen what 306 blow throughs can do, so I can't even imagine what yours will be like. I don't think you will need to worry about the clear license plate, the parachute you are going to need will cover it up anyway. LOL!

69clark · Dec 4, 2006

Wow, sounds like alot of fun going on in the next few months!

BlackVert · Dec 4, 2006

NeverFastEngh said:
I am almost done putting my 408 together. SVO 4 bolt block, eagle rotating assembly, AFR 225s, Edelbrock super victor direct port intake, Holley 750 DP, and an 88mm turbo. Backed with a twin disc clutch, Viper T-56, 9in rear, new fuel system, ALL autometer guages (no cluster or comp), New paint, and clear licence plate cover.

Taking the 357 EFI engine out and using it as a table or something. I am tired of efi for now so i will see what happens with a blow through carb turbo setup.

lol did refinance your house too?

NeverFastEngh · Dec 4, 2006

Had to sell an explorer and give up getting an 03 to do it. I think it will be worth it. There are enough 03s around.

zZsKyZz · Dec 4, 2006

I am

Pro Prod Intake [Ported]
GT40 Heads [ported to match intake]
Steeda #19 cam
24lb injectors
75MM Throttle Body
100 shot of dry nitrous..

Hoping for the 12's N/A

BlackVert · Dec 4, 2006

NeverFastEngh said:
Had to sell an explorer and give up getting an 03 to do it. I think it will be worth it. There are enough 03s around.

i hear ya. all told, i'll end up dropping probably $15k or more on mine, but it will be worth it. plus, that is 1/2 of what a new 06 vert goes for, so i'm actually saving money.

how's that for a rationalization?

Killercanary · Dec 4, 2006

69clark said:
Not too much here. I would like to put on a hogan sheetmetal intake, some custom upholstery in the interior, maybe a custom sound system (nothing crazy, just a simple, clean, custom install) and some small tinking stuff.

I may get a powder coating setup and do some of my own stuff, we'll see.

I WILL have a hogan someday. I just bought the holley as it was too good of a deal to pass up and I have to cut corners somewhere in order to get this car running soon.

I have the eastwood hot coat kit and LOVE it. Its really easy to use and the results are outstanding... as long as you really prep the parts.

Some people I'll be watching based on this thread:
-all of the turbo guys. I just love turbo'd 5 liters. Black STampede, Swingline, Eades5.0- you guys better have RUNNING turbo'd cars and get us some track/dyno numbers!!!
-94GTS- I want to see that combo on the spray, it should be an animal!!!
-MattZ281LE- your building my one of my favorite short blocks, a 363 8.2 deck shortblock, and then your topping it off with all sorts of goodies. Your old combos were impressive, this one should cause jaws to drop!
-Parchisi- A procharged 408!?!? There's a local guy around here with one and its a solid 9 second street car. I can't wait to see your numbers!
-KBCobra95- finally an all out KB combo. I can't wait to see your results. a dart 331 is bad ass!
-Neverfastenough- what more is there to say but I can't wait!!!
-BlackVert- your build is going to be INSANE! I love seeing other 'verts all done up. I can't wait to see your finished project too!
Good luck to everyone else with your projects too! Is there anyone else out there with some lofty goals and a way to achieve them??? if so let's hear about it!

The Green GT · Dec 4, 2006

Paul give me your old intake for christmas.

Ill put your name on my car like a sponsor.

So who is turning things up a notch this year?

Nik_95Cobra

69clark

Pokageek

Active Member

BlackVert

4Jenna

urban96

bubb rubb says:"woo woooooo"

ProKiller

gcomfx.com

4Jenna

gcomfx.com

Killercanary

The car that set the bar.

NeverFastEngh

New Member

Killercanary

The car that set the bar.

69clark

BlackVert

NeverFastEngh

New Member

zZsKyZz

Member

BlackVert

Killercanary

The car that set the bar.

The Green GT

No 13 year olds are safe around me.

Similar threads

So who is turning things up a notch this year?

Active Member

bubb rubb says:"woo woooooo"

The car that set the bar.

New Member

The car that set the bar.

New Member

Member

The car that set the bar.

No 13 year olds are safe around me.

Similar threads

Privacy & Transparency

Privacy & Transparency