I have an '87 5.0 and I would love some advice from someone that has been doing this longer then I have. Now that I have another car, this is not my daily driver so I am seeing what I can do to it. right now the car is basically stock but runs well. timing advanced to 15 degrees, cf df clutch, 70 mm tb, optima battery, maf conversion, quadrant, and some msd wires. I have just done these small things but now I want to move to bigger mods for it. I know nothing about if the motor was rebuild which friends think it was because of how strong it runs, but tranny is not doing as well. With the t-5 I have in it is it best to send it off and get it rebuilt for 600, put stronger parts in it for like 1,900 to have a t-5 that can take 500 lb. torque or just get a tremec tko-500/ or 600. The car is going to be a weekend car that I want to keep streetable but also a car that is going to put out over 450 horses at the wheels. My second question is for the motor. With the stock motor in there is it easier/cheaper/faster to buy a crate motor from dss to achieve that power I want. I know dss offers stroker kits for my car but is it good to put a 347 stroker kit on a stock 302. I am trying to find the best way to go. I don't want to go the cheap way but I want to go the right way on a budget. I would love some help to see what ya'll think. thank you
-Chris
-Chris