some chaper parts that count...

[90mustangfan]

What are a few cheap parts around 350 and under, that ill notice some performance gain? With out taking apart the motor....would I notice a gain by adding 1.7 roller rockers? Or would I notice performance with a 75mm MAF? Or a FPR?
Im looking for a nice addition to my mods list that will be some money spent good. and have some gain like atleast a 1th or 2...
Im really shooting to get the most out of full-bolt-ons on stock-heads/Intake. That way when I have the rest saved up for trickflow top-end kit It will be a full bolt-on h/c/i, ready to run

 

[ryan218]

hmm.....you alreay have gears. id go for some SFC before you go adding to much more...if your wanting some power gain. look around on ebay, craigs list ect for a used Trick flow upper and lower intake. you can find them for around 350 if you look!

 

[85_SS_302_Coupe]

Figure out ways to cut weight....that'll get you more ET than anything you can buy with $350 except nitrous.

 

[90mustangfan]

I already have subframes, and lca/uca...my suspension is pretty much good to go.

 

[NKau]

Honestly, I'd upgrade the intake to an edelbrock peformer/TF street heat (can find either of these for around $300 used in nice shape), along with getting a 65mm tb and a bigger MAF. You can find each of the latter used for around $100-$150 apiece as well. These will get you your best power gains without really getting into the engine.

 

[Mustang5L5]

Elim A/C, convert to 130A alt and install e-fan.

 

[carbed87]

do those 295's hook, maybe some slicks...is it caged, you can get a MM six pointer for around that if im not mistaken. that would add a lot of structural integrity to the car