Someone with a Tech Manual Please

Can someone with a Tech manual please look up under ignition system, coils. Which colored wire supplies the 12volt power for the coil ignition on the #7 cyl. I believe it is number 7. I'm not looking at the engine, so I forget how the cyl. are numbered, but its the last coil on the drivers side (near the firewall)

The two color choices are white/pink and white/blue. Trying to install an MSD Dis-Tachless driver, for coil on ignition systems. Don't want to splice the wrong wire

Thanks alot man. I knew someone would probably know, but I was looking for exactly what he posted up! A diagram! I don't have a tech pub yet, my local auto shop ordered one for me. But I have this MSD Distributor-less Tach driver so I can use an aftermarket tach w/shift lift. (don't worry the tach is only 3 1/2 inches, not 20" like the ricers!)

The instructions said that on the 99-newer Fords, the white/blue wire was the 12v supply, but without a fluke meter on hand, I didn't want to splice the wrong wires. I cringe at the thought of messing with any ignition system wires, but I already spent $80 on the tach and $75 on the tach driver. Might as well put it to use. Thanks alot

Actually I just noticed, why does it say *12v next to each coil by the white/blue wires? (on the diagram)