Speedometer broke? bouncing

Mine also broke. But it was working fine with the old cable I had, then the old cable snapped. I replaced the cable and it started acting really goofy after I replaced it. But my mileage still works Now the speedo needle just sits at like 190mph. So I think I'm just going to get a used one off ebay.

no such luck more me. I bought a used one off ebay. Installed it and it worked fine for about a week. All of a sudden it starts going crazy again and now it just sits there not moving. It's doing the exact same thing my original one did. I dont know what the hell is wrong with my speedometer setup. It has to be that new cable, do I need to lube up that new cable with something?

yes the cable does need lube on it. you can use a combination of atf and white grease to lube the cable. just put some into a rag, mix it well, and run the cable through that part of the rag.

19stang66 said:

no such luck more me. I bought a used one off ebay. Installed it and it worked fine for about a week. All of a sudden it starts going crazy again and now it just sits there not moving. It's doing the exact same thing my original one did. I dont know what the hell is wrong with my speedometer setup. It has to be that new cable, do I need to lube up that new cable with something?

Click to expand...

Did you replace just the internal cable itself, or the cable and sleeve. I've been through this 3 times myself.

First one, the end of the cable broke off. It would still manage to catch every now and again and work, but not consistently. So I replaced the cable and sleeve.

Second one, I didn't route it tight enough and then about 2 days later it lay down on my exhaust, and melted that sleeve right into the cable.

Third one, I made sure it wasn't going to touch the exhaust again. Worked for about a week, then stopped. In my zeal to ensure it wasn't going to rest on the exhaust, I neglected to see if it wasn't going to ever touch the header. Melted again.

But the fourth one! The fourth one stayed up! (Anybody every see Monty Python and the Holy Grail? I felt like the king in the swamp!)

I replaced the whole shebang, just not the speedo gear in the tranny. I have it routed where it shouldnt be getting near the exhaust or headers. I'll have to try lubing it up.