• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

speedometer ratio adapter?

  • Thread starter Thread starter snowman23
  • Start date Start date Jul 23, 2006

snowman23

Member
May 2, 2005
242
6
19
"in every direction"
Jul 23, 2006
#1
  • Jul 23, 2006
  • #1
I did a search and think I have at least begun to head in the right direction. I have a 90 GT AOD. It has 3.73s in it. When I had them installed they put in a 21 tooth gear and I was way off. I ordered the black 23tooth from Steeda and that helped but I am still a little off. I called Steeda back and they said that I would be 7% off or so no matter what unless I had a speedometer shop make an adapter to correct this.

My question is what exactly so I need to be lookiing for / asknig for to have this straightened out? I do not want to be putting extra miles on the car and I really don't like being off.
The second part is if I do get it straightened out, should I put the 21 tooth gear in again and have it "corrected even more" so that I dont run the risk of chewing up the 23 tooth gear? My 23 tooth is black I am pretty sure and I have really only read about the white one getting chewed up. I really need someone to point me in the right direction. THANKS in advance.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 23, 2006
#2
  • Jul 23, 2006
  • #2
The stock range of speedo gears work correctly with a limited range of tire sizes. The 23 tooth white gear works good for some guys, but self destructs in a few months for others.

See http://www.corral.net/tech/gearcalc.html for more help

Check to see if there is a speedometer shop in your area. If there is, ask about the Stewart-Warner speedometer gearbox. I believe it is either a 777 Series Drive Joint Kits and Parts or 666 Series Drive Joint Kits and Parts. It is a small gear box that fits between the speedo pickup gear on the transmission and the speedometer. It has quick change gears that allow you to choose almost any tire size and rear end gear ratio you want. This will allow you to get the accuracy with within 1%-3%. The drawback is that it isn't cheap.
Please excuse the typo (their's, not mine) in the following picture - it should read Custom ratio adapters, not Custom radio adapters.

See http://www.gaugeguys.com/ratioadapt.htm for more info.
 

snowman23

Member
May 2, 2005
242
6
19
"in every direction"
Jul 23, 2006
#3
  • Jul 23, 2006
  • #3
thanks Jrichker,

I saw your post in my searching. Is the ratio adapters pictured the same as the Stewart-Warner gearbox that you mentioned? Also, am I correct in the assumption that I need a mechanical adapter and not any type of electronic adapter?

I plan on calling the guageguys tomorrow and seeing what they have to say. The problem is I am away from home and my car for a week and can't do the test they are asking to be done ahead of time, but in the same respect would like to get the ball rolling if possible so when I get back I can resolve this.

I wish I knew I could have just changed to a 7 tooth gear in the tranny when I had it pulled apart for a rebuild!!!
 
You must log in or register to reply here.

Similar threads

T
Drivetrain Can’t identify correct speedometer gear
  • townethug
  • Jul 12, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
341
Fox 5.0 Mustang Tech Jul 21, 2025
FastDriver
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
323
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
S
Speedometer Calibration
  • Sonny Bibb
  • Sep 11, 2026
  • Digital Self-tuning Forum
Replies
4
Views
379
Digital Self-tuning Forum Sep 13, 2026
Sonny Bibb
S
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
201
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
343
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?