• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

spings/strut combination

  • Thread starter Thread starter 02GT/65coupe
  • Start date Start date Dec 28, 2005
0

02GT/65coupe

New Member
Nov 1, 2003
66
0
0
alabama
Dec 28, 2005
#1
  • Dec 28, 2005
  • #1
i am running FRPP C springs and i got a set of tokico hp blues to go with them. i also have cc plates x2 balljoints and steeda bumpsteer. my question is, is there any better shock/strut to go with the rating of the springs. i know i will never be able to get it but to handle like my rx8 but i would like to improve it. th 8 i can go down the road to town at 94 the entire way, my car its pushing it to try 80. i'm looking for a more stiff tightness to the suspention. lol and by the way for all the die hard stang fans, sorry for having a ricer too.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Dec 28, 2005
#2
  • Dec 28, 2005
  • #2
Try looking around on the Maximum Motorsports website. They list the spring rates that the various types of Bilstein shocks they sell shoud be used with. There is a lot of good info on there. Do you know what the front and rear spring rates are for the FRPP C springs?

Also, a panhard bar and some chassis stiffening should help you get to where you want to be with your suspension.
 
H

Hornetsnest

New Member
Jul 9, 2005
150
0
0
San Diego, CA
Dec 28, 2005
#3
  • Dec 28, 2005
  • #3
02GT/65coupe said:
...i know i will never be able to get it but to handle like my rx8 but i would like to improve it....for all the die hard stang fans, sorry for having a ricer too.
Click to expand...
I hope you weren't talking about your rx8...It's not a Z06, but definately not in the "ricer" category either...I wish it had more power, but still a nice car.
 

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Dec 28, 2005
#4
  • Dec 28, 2005
  • #4
maybe a coilover package is what you need

or possible tokico d specs with h&r springs

have you upgraded the swaybars....?
sugesstions would be steeda, MM, and/or frp (bullit package)

definately stiffen up the chassis.
 
0

02GT/65coupe

New Member
Nov 1, 2003
66
0
0
alabama
Dec 28, 2005
#5
  • Dec 28, 2005
  • #5
the fronts are 650 and the rears are 200/300. i was looking into the grip in a box package but then i would have to redo the entire setup. i know a friend that has coil overs and he has had them for 3 years and still hasnt finished tweaking them. lol he had it to corner really nice but the fron passenger side was higher than the rest of the car. oh and off the subject but thanks for the recomendation for the silverstars a while back kilgore. world of differance for the price.


and no i havn't upgraded sway bars yet. but i have noticed when going down the highway it seems to wonder just a little bit and i'm not turning the wheel. thats why i have started driving the RX8 more now, plus the nav. system i never get lost. still trying to hack the cdrom sofware to let you play dvds on it. the european model you can but the hand brake has to be up.
 

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Dec 28, 2005
#6
  • Dec 28, 2005
  • #6
02GT/65coupe said:
the fronts are 650 and the rears are 200/300. i was looking into the grip in a box package but then i would have to redo the entire setup. i know a friend that has coil overs and he has had them for 3 years and still hasnt finished tweaking them. lol he had it to corner really nice but the fron passenger side was higher than the rest of the car. oh and off the subject but thanks for the recomendation for the silverstars a while back kilgore. world of differance for the price.


and no i havn't upgraded sway bars yet. but i have noticed when going down the highway it seems to wonder just a little bit and i'm not turning the wheel. thats why i have started driving the RX8 more now, plus the nav. system i never get lost. still trying to hack the cdrom sofware to let you play dvds on it. the european model you can but the hand brake has to be up.
Click to expand...


alignment issue
it should drive as straight as an arrow the toe sounds like its off.
that and tires is the tire pressure equalized on all of them?
 
0

02GT/65coupe

New Member
Nov 1, 2003
66
0
0
alabama
Dec 28, 2005
#7
  • Dec 28, 2005
  • #7
i don't think its the alighnment, i had it done when i put all the stuff on by the guy that does performance alighnments for autocross cars. but that was while i was stationed in NJ but he might of missed something.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 28, 2005
#8
  • Dec 28, 2005
  • #8
02GT/65coupe said:
and no i havn't upgraded sway bars yet. but i have noticed when going down the highway it seems to wonder just a little bit and i'm not turning the wheel. thats why i have started driving the RX8 more now, plus the nav. system i never get lost. still trying to hack the cdrom sofware to let you play dvds on it. the european model you can but the hand brake has to be up.
Click to expand...
do you have steering wheel play?


if i'm not mistaken you can override the sensor that allows the handbrak to be 'noticed' when it's on, it keeps the sensor on then you can add a flip switch to turn off the brake light when you don't want it on
 
0

02GT/65coupe

New Member
Nov 1, 2003
66
0
0
alabama
Dec 28, 2005
#9
  • Dec 28, 2005
  • #9
yes, it is very little. if you don't drive the car all the time you wouldn't notice it. before i got the tokicos there was really bad understeer and then whne it reacted from the body roll there was bad oversteer at highway speed.

thinking of getting something with really stiff valveing. maybe upgrade the body bracing later.


and as far as the dvd playing in my rx8 thats a software thing. they made the US model to where it won't play them. but like i mentioned the european model they will, but the handbrake had to be one or make it think it was one.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 29, 2005
#10
  • Dec 29, 2005
  • #10
maybe the joints in the steering shaft are worn out
 
0

02GT/65coupe

New Member
Nov 1, 2003
66
0
0
alabama
Jan 1, 2006
#11
  • Jan 1, 2006
  • #11
anyone heard of or know of anyone using racecraft N2 shocks struts. looking for a web page on them and more info. i know thats what are on the saleen stangs now.
 
You must log in or register to reply here.

Similar threads

Still need an Alignment?
  • from6to8
  • Jun 1, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
303
1994 - 1995 Specific Tech Jun 2, 2025
AeroCoupe
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
SOLD MM coil overs, koni struts, qa1 rears, h&r rear springs and more in NJ
  • 2000xp8
  • Mar 15, 2023
  • Suspension Parts
Replies
3
Views
2K
Suspension Parts Mar 20, 2023
2000xp8
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
Kind of stiff feel in front suspension
  • from6to8
  • Mar 29, 2023
  • 1994 - 1995 Specific Tech
Replies
3
Views
1K
1994 - 1995 Specific Tech Mar 30, 2023
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?