• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Starter solenoid problems...

  • Thread starter Thread starter SilverSER
  • Start date Start date Mar 20, 2006
S

SilverSER

New Member
Feb 17, 2006
8
0
0
Mar 20, 2006
#1
  • Mar 20, 2006
  • #1
Well I posted a few days ago about how my 87 5.0 starter keeps staying engaged. So far I’m totally stumped at what could be going on. My problem is once the car is started, the starter will stay engaged until the battery is disconnected. So I’ve replaced all of the following…

Starter
Starter cable
Battery
3 Solenoids
Ignition switch

And the problem still occurs! I know the starter solenoid is a major part of the problem because I had the ignition switch out and connected the battery cable and it still tried to start. If I disconnect ignition wire from the solenoid and connect the battery, I read 50 volts on the ignition post of the solenoid. Is that a normal amount? Does anyone have any idea what could be causing these solenoids to lock up and go bad? I’ve checked all the grounds and made sure none of the bolts were loose.

One additional thing, once a new solenoid is in place I can start the car normally one time. Once the car is shut off and I try to restart it, it goes back to square one. I’m not sure where to go next? Anyone, help please!!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 20, 2006
#2
  • Mar 20, 2006
  • #2
50 volts is just a little high.

What flavor of solenoid are you using?
 
S

SilverSER

New Member
Feb 17, 2006
8
0
0
Mar 20, 2006
#3
  • Mar 20, 2006
  • #3
HISSIN50 said:
50 volts is just a little high.

What flavor of solenoid are you using?
Click to expand...

Not sure what you mean by what flavor but the one i'm using now I bought at NAPA. When I bought it the guy asked if I wanted a regular one or a heavy duty one. Since i've already went through 3 I opted for the cheap one! Any idea what I might gain from the heavy duty?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 21, 2006
#4
  • Mar 21, 2006
  • #4
Next time it happens, pull the small push on connector (red wire) off the starter relay (looks like it is stuck on a screw). If it quits cranking, the ignition switch is bad.
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Mar 21, 2006
#5
  • Mar 21, 2006
  • #5
I had the same thing happen on my 85. Even after going to a push button. I had some one tell me to add an extra ground to the neg cable, and it worked. I don't know why, but it has done fine for over a year.
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
527
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
415
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
264
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
T
Electrical 1990 Vert starting/Solenoid issues
  • Tom77
  • Apr 18, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
522
Fox 5.0 Mustang Tech Apr 18, 2025
85GTStangGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?