Well I posted a few days ago about how my 87 5.0 starter keeps staying engaged. So far I’m totally stumped at what could be going on. My problem is once the car is started, the starter will stay engaged until the battery is disconnected. So I’ve replaced all of the following…
Starter
Starter cable
Battery
3 Solenoids
Ignition switch
And the problem still occurs!
I know the starter solenoid is a major part of the problem because I had the ignition switch out and connected the battery cable and it still tried to start. If I disconnect ignition wire from the solenoid and connect the battery, I read 50 volts on the ignition post of the solenoid. Is that a normal amount? Does anyone have any idea what could be causing these solenoids to lock up and go bad?
I’ve checked all the grounds and made sure none of the bolts were loose.
One additional thing, once a new solenoid is in place I can start the car normally one time. Once the car is shut off and I try to restart it, it goes back to square one. I’m not sure where to go next? Anyone, help please!!
Starter
Starter cable
Battery
3 Solenoids
Ignition switch
And the problem still occurs!
I know the starter solenoid is a major part of the problem because I had the ignition switch out and connected the battery cable and it still tried to start. If I disconnect ignition wire from the solenoid and connect the battery, I read 50 volts on the ignition post of the solenoid. Is that a normal amount? Does anyone have any idea what could be causing these solenoids to lock up and go bad?
I’ve checked all the grounds and made sure none of the bolts were loose.One additional thing, once a new solenoid is in place I can start the car normally one time. Once the car is shut off and I try to restart it, it goes back to square one. I’m not sure where to go next? Anyone, help please!!
