• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

starter

  • Thread starter Thread starter 32785stang
  • Start date Start date May 31, 2007
3

32785stang

New Member
Nov 23, 2006
30
0
0
May 31, 2007
#1
  • May 31, 2007
  • #1
I juts bought procomp electronics high tourqe mini starter from mustangs unlimited part no. PC2107 the only problem is it has a solenoid on the starter. Whats the best way to wire it when im still using the fender mounted solenoid. theres no tech line for the damn company either. guess thats what you get for a $90 starter
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
May 31, 2007
#2
  • May 31, 2007
  • #2
that solenoid on the starter engages/disengages the starter motor gear to/from the flywheel/flex plate. the solenoid on the fender well only relays power to the starter solenoid when you hit the ignition switch. they are two totally seperate items.
 
3

32785stang

New Member
Nov 23, 2006
30
0
0
May 31, 2007
#3
  • May 31, 2007
  • #3
the new starter has 3 terminals. and the old one had one. so im just wondering what one/s to hook it to
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
May 31, 2007
#4
  • May 31, 2007
  • #4
since the mini-starter has its own built in relay (that is triggered by the small 12-ga wire), the fender mounted relay isnt even necessary. but i recomened using it. you could wire it up like this....



On the diagram on the right for the mini-starter, you can see the small "12V key" wire going into the fender relay, and then a small wire going from the right hand (output) side of the fender relay and down to the starter. you could bypass the fender mounted relay altogether and just connect the small 12V key wire directly down to the starter to act as the trigger? Right now with the way it's set up, you basically have a relay (on the fender) triggering another relay (on the starter). Seems redundant.

If you did this, the fender mounted relay would basically just act as a terminal block for the starter constant hot/battery/alt/other wires coming together, and you would like to clean this up and use a nicer terminal block such as the one pictured below. this should work. maybe JRICHKER or someone with a little more electrical insite can help you better if this doesnt work.

[/
 
3

32785stang

New Member
Nov 23, 2006
30
0
0
May 31, 2007
#5
  • May 31, 2007
  • #5
thanks...ill have to try that. if anyone else has any more imput feel free
 
S

sivart

New Member
Apr 15, 2007
28
1
0
May 31, 2007
#6
  • May 31, 2007
  • #6
i just did this, the small wire goes on the right side of the relay and the big wire goes
on the left side (the same terminal as the battery) i re-ran the wires down and around the oil pan, so it did not go ne where the headers. hope this helped.
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
527
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
Electrical Mini-Starter Wiring
  • RekeHavoc
  • Jul 25, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Aug 24, 2025
Mustang5L5
Electrical Inaccessible starter solenoid from wire tuck, what are my options for an alternator upgrade?
  • AnthonyA1234
  • Jan 16, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
1K
Fox 5.0 Mustang Tech Feb 8, 2025
Mindseye007
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
691
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?