• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Starting Issue (neutral safety?)

  • Thread starter Thread starter ShallowGrave
  • Start date Start date Jul 11, 2006

ShallowGrave

Founding Member
Sep 30, 2001
371
0
16
Philadelphia
Jul 11, 2006
#1
  • Jul 11, 2006
  • #1
ok, first let me say that I did search...

92 5.0 w/t5 (ex 2.3 auto)

I turn the key, pump primes and bells ding but I get nothing from the starter.
I charged the battery (car not driven in 2 years), checked the cables and replaced the solenoid but no luck. I can get the car to crank and start if I jump the 2 big poles on the solenoid which has me thinking one of the two neutral (clutch) safety switches is bad.

Anyone agree? How do I test em?
 

6SpeedLX

New Member
Apr 5, 2005
100
0
0
Mass
Jul 11, 2006
#2
  • Jul 11, 2006
  • #2
pull the 4 wire connector off the T5, its on the driver side....jump the pink and white wires ( i beleive those are the colors), thats for the NSS on the tranny....the other wires are for cruise control. if it works then you know the tranny NSS is bad.....as far as the clutch pedal switch goes...idk how you would test that. is your foot completely on the floor? i know in mine if i dont have it touchin the floor it wont start
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 11, 2006
#3
  • Jul 11, 2006
  • #3
For the clutch safety switch, Just look for 12 volts at the S-terminal on the solenoid while cranking. If none, check the actual CSS by lookin for 12 volts into the switch during cranking, and egressing it while the switch is closed.
If no input to the CSS, check the ignition switch.

Good luck.
 

89Notch

Founding Member
Oct 21, 1999
1,669
0
0
MSU
Jul 11, 2006
#4
  • Jul 11, 2006
  • #4
Ya check to make sure the small terminal of the selenoid is getting voltage. If it is it could be a bad selenoid if not check the NSS like they said.
 

ShallowGrave

Founding Member
Sep 30, 2001
371
0
16
Philadelphia
Jul 11, 2006
#5
  • Jul 11, 2006
  • #5
thanks. I just found a burnt out wire under the dash leading to the alarm system so it may not be the NSS after all. I'll keep you posted.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 11, 2006
#6
  • Jul 11, 2006
  • #6
ShallowGrave said:
thanks. I just found a burnt out wire under the dash leading to the alarm system so it may not be the NSS after all. I'll keep you posted.
Click to expand...
If it was part of the starter interlock/starter kill wiring for the alarm, you might have found the issue. If you find a starter kill relay, you can do quick testing right there to see if you have continuity (between terminals 30 and 87A for most starter kill relays).

Good luck.
 

ShallowGrave

Founding Member
Sep 30, 2001
371
0
16
Philadelphia
Jul 15, 2006
#7
  • Jul 15, 2006
  • #7
fixed it. Alarm wire chafed and burned out both the fuse and a section of wire. Thanks for the ideas
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 15, 2006
#8
  • Jul 15, 2006
  • #8
ShallowGrave said:
fixed it. Alarm wire chafed and burned out both the fuse and a section of wire. Thanks for the ideas
Click to expand...
I'm glad you found that - it wouldnt have been anything I would have readily thought of as likely.

Nice work!
 

ShallowGrave

Founding Member
Sep 30, 2001
371
0
16
Philadelphia
Jul 16, 2006
#9
  • Jul 16, 2006
  • #9
yea, I never would have thought it either but I noticed that the alarm suddenly wasn't working and figured that the two must be related.
 
You must log in or register to reply here.

Similar threads

A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
602
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
406
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
421
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
P
What are these connectors
  • Papes
  • Jan 2, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
737
Fox 5.0 Mustang Tech Jan 4, 2025
General karthief
T
Electrical 1990 Vert starting/Solenoid issues
  • Tom77
  • Apr 18, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
526
Fox 5.0 Mustang Tech Apr 18, 2025
85GTStangGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?