im looking to add some gt40p's and a cobra intake along with some shorty headers, anyone have any suggestions on a cam im leaning towards the steeda, please keep in mind my car is a sumemr cruiser vert with 40k miles on it, never sees the track, just looking to wake her up a bit
The TFS stage 1 is a more aggressive cam and it is better suited for a GT40P combo. It could give the computer some problems, although I've never heard of it.
There are better cams out there than the Steeda cam, but most of them will probably cause stalling and the such. If you want to install it and forget about it, use the Steeda. After all, it is better than the stocker.
That is probably going to be a negative, although I've never heard one in person. Combined, the LSA and the duration of the cam make up how it's going to "sound". Although it has decent duration numbers, the wide LSA of 115 or 116 (which ever it is), is going to drown out most of that "cammed" sound. PM RIO5.0, he's got the Steeda and could tell you more about it than I could.
The stedda # 19 does not offer a big "loop loop" cam sound that you can hear. But is does sound different than the stocker. I have had"0" issues with this cam and my computer, There are better cams out there is you want a few more ponies, but this one drops in and goes. Everyone complains about losing bottom end. I didnt really notice a difference, but then again I did all my mods at the same time.
I would reccemend the #19 also, I havent had any issues since I installed it,and it does offer a more lopey idle especially at a lower idle.I went with 1:7 RRs for a bit more lift.