Stock Gear Ratio

You can also take a lokk at the sticker on the driver's side door piller, on the bttom right hand side under "AX" there should be a number or a letter.
"A" is 2.73's limited slip
"C" is 3.27's limited slip
1 is 2.73's with the conventional differential
Unless of course the stockers have been swapped out :rolleyes:
 
tomustang said:
hmm. I know it having the gears in any car were optional but I was sure that autos got 3.08's :shrug:

I don't know but 98's has auto's stock 3.08's


my mechanic swore i had 3.08 or 3.27's...when i kept telling him nope 2.73
when he swapped in my 3.73's he said yup...you had 2.73's...i did the spin the wheel/driveshaft test.

this is ford we are talking about...not much uniformity going on
what should be in and what gets put in are two different things.
 
Here's the complete list of axle codes and ratios for all years.

L - Limited Slip Differential
C - Conventional Differential
1 2.87C 2 3.55C 4 3.42C
5 3.27C 6 3.73C 68 2.73C
7 3.07C 78 2.73C 8 2.73C
A 3.08L A 3.63C AM 2.73L
B 2.47C BM 2.73L C 3.27L
D 3.42L E 3.27L EZ 3.08L
F 3.45C HZ 3.08L J 3.85C
K 3.55L LE 3.27L M 2.73L
ME 3.27L R 3.45R SE 3.27L
VM 2.73L W 3.73L X5 3.27C
Y 3.08C Z 3.08L Z5 3.27C
 
  • Like
Reactions: mattmm04
I just checked my shop manual. It lists the following for 96'-98'
1........2.73 conventional dif.
A........2.73 or 3.08 limited slip
C........3.27 limited slip

Not sure why it lists the same axle code for the 2.73's and the 3.08's :shrug: