• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Stock Or Modify??

  • Thread starter Thread starter Audiophile
  • Start date Start date Jan 9, 2018
  • 1
  • 2
Next
1 of 2 Next Last

Audiophile

Well-Known Member
Sep 9, 2013
202
48
59
Southern CA
Jan 9, 2018
#1
  • Jan 9, 2018
  • #1
Good Evening All,

It's been awhile since I've posted.

Just wanted some general thoughts from the enthusiasts and experts out there.

I've been doing some very slight mods to my 92 GT, both mechanically and visually. But, I purchased mine as an original, stored, and well cared for stock 92. It has original interior, original paint, and aside from the cat back exhaust, gears, and shifter, stock mechanical. Odometer is sitting at 76K and change, documented.

The few things I've done to it I've kept all original parts, except for the exhaust. I have them wrapped and stored properly.

I would like some thoughts and opinions from others on how important it is to keep it relatively stock, as a so called survivor, as compared to modifying goes? Unless hard times hit, I never plan on selling this car. I love to make things custom, do stuff a little differently and make it my own. However, would I be doing a, for lack of a better term dis-justice to the car to do things the way I would like? Or should I just say screw it and make it like I want?

I just want to hear opinions and or experiences of others out there. I realize the Fox platform is staring to bring more money, but that is really not my goal here.

Thanks to all in advance who take the time and care to comment.
 
Last edited: Jan 9, 2018

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Jan 9, 2018
#2
  • Jan 9, 2018
  • #2
Mechanicals are reversible, and will not affect the car adversely. As long as something can be unbolted,..It's not going to damage your resale. (especially since you said it's not your intention to re-sell it)

Unmolested stock is attractive to a certain percentage for sure...but again, only when it comes to resale,..It all becomes a matter of personal choice after that.
Personally speaking, anything I had that was stock..."was" stock.
Stock left the building one minute after I own the car.
 
Last edited: Jan 10, 2018
Reactions: a91what, Adieu and Audiophile

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,238
2,942
224
Vass, NC
Jan 9, 2018
#3
  • Jan 9, 2018
  • #3
Foxes are like legos. You can build anything you want out of them, but if you never build them into anything, you're missing the point!
 
Last edited: Jan 9, 2018
Reactions: Hoytster and Davedacarpainter

Adieu

Easy there, this ain't a dating site.
20+ Year Stangneter
Mar 7, 2002
9,531
5,187
224
Jan 10, 2018
#4
  • Jan 10, 2018
  • #4
Audiophile said:
Good Evening All,

It's been awhile since I've posted.

Just wanted some general thoughts from the enthusiasts and experts out there.

I've been doing some very slight mods to my 92 GT, both mechanically and visually. But, I purchased mine as an original, stored, and well cared for stock 92. It has original interior, original paint, and aside from the cat back exhaust, gears, and shifter, stock mechanical. Odometer is sitting at 76K and change, documented.

The few things I've done to it I've kept all original parts, except for the exhaust. I have them wrapped and stored properly.

I would like some thoughts and opinions from others on how important it is to keep it relatively stock, as a so called survivor, as compared to modifying goes? Unless hard times hit, I never plan on selling this car. I love to make things custom, do stuff a little differently and make it my own. However, would I be doing a, for lack of a better term dis-justice to the car to do things the way I would like? Or should I just say screw it and make it like I want?

I just want to hear opinions and or experiences of others out there. I realize the Fox platform is staring to bring more money, but that is really not my goal here.

Thanks to all in advance who take the time and care to comment.
Click to expand...
I've been known to modify die-casts, micro RC cars, and even rat-rod my farm trailer (painted the steelies red, put a set of dog dish hubcaps on it and left the patina of the 33-year old paint alone. If it has four wheels and I own it, it gets modded. That poor 4Runner I bought doesn't know what's in store for it yet.
 
Reactions: General karthief

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,061
3,134
204
Middle of Maine
Jan 10, 2018
#5
  • Jan 10, 2018
  • #5
Back when my Saleen was a street car, it was still highly modified, 331 stroker, KB S/C, TKO, twin disc clutch, cowl hood ect. I had it at a Mustang car show that was big enough to have Steve Saleen in attendance. He autographed the dash and the rear view mirror. He looked over the car and said "well, it looks like you are having fun with this one" I replied, yup, thats the whole point of the car! Right? Some people still wonder why I turned a Saleen into a drag car, after all it is limited production, blah, blah, blah. But really, what is a Saleen but a modified production Mustang. I am just modifying the modified car. Lol
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,478
1,349
173
Jan 10, 2018
#6
  • Jan 10, 2018
  • #6
I like the appearance of "stock." But I also like tastefull mods. I like to stick with wheels that are designed specifically for Mustangs. I don't like wheels that at designed for any car. Cobra or Explorer intakes, Ford Racing parts, stuff like that. I personally like to stick with Ford upgrades. I like to stick with OEM style paint, I don't like custom paint jobs, racing stripes, etc. I like sleeperish looking cars. But, to each his own.
 
Reactions: joetrainer31 and 88LXSleeper

Hoytster

I don't dare do that to my Knob
20+ Year Stangneter
Dec 30, 2002
1,069
700
164
Cornwall, PA
Jan 10, 2018
#7
  • Jan 10, 2018
  • #7
Audiophile said:
I realize the Fox platform is staring to bring more money, but that is really not my goal here..
Click to expand...

I think you answered your question right there. Personally, I don't see any reason NOT to modify these vehicles. There are just so many ways you can build and modify these cars and that, for me, is the true fun in owning a mustang. But then again, I modify every vehicle and engine I own. Who says a weed wacker doesn't need a port job, exhaust, increased compression, and a carb kit My current build had less than 60K original miles and that isn't stopping me.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jan 10, 2018
#8
  • Jan 10, 2018
  • #8
It's really your car as to what you do.

I know if I had a second fox, I'd leave it stock and focus on restoring/preserving and repairing only with OEM or NOS parts. However, not having a car to modify...I'd probably go crazy.

There's a happy medium that you need to find.
 
Reactions: mikestang63 and BlakeusMaximus

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 10, 2018
#9
  • Jan 10, 2018
  • #9
It all comes down to if you plan on keeping or selling the car, and what makes you happy.
Pretty much any modification is reverseable unless you start welding in cages and backhalfing the car
Keep all the stock parts you take off and enjoy the car
Just know there is a direct inverse relationship between driveability and the amount you modify the car.
I'm having more fun driving my 86 with only a catback than I have with several of my highly modified cars- just turn the key and go.
 
Reactions: joetrainer31, General karthief and 95BlueStallion

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Jan 10, 2018
#10
  • Jan 10, 2018
  • #10
Keeping it all stock is purely about resale as stock cars become more and more rare. That being said, its hard for me to suggest modding a nice all original fox, as they are so few and far between now.

My car was all original when I bought it last year, but was straight up worn out. Wheel bearings hummed, brakes barely worked, the engine would barely rev past 3500 RPMs, and my front bumper had already been poorly fiberglassed. That helped me turn the corner on deciding to modify it.

In the end, if you literally never plan to sell, make the car whatever you want it to be.
 
Reactions: mikestang63

88LXSleeper

Active Member
Jan 6, 2016
146
56
48
Jan 10, 2018
#11
  • Jan 10, 2018
  • #11
If you drive it often it will be more enjoyable if you don't go overboard on it. I like the stock look too, not many foxes I see around have stock wheels anymore. Mine looks stock except for lowered a bit.
 
Reactions: revhead347

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Jan 10, 2018
#12
  • Jan 10, 2018
  • #12
Personally, if I found an 8 original mile barn find, it would be modded within hours of purchase. That's just me. It also would depend on what things you were considering modding. If it's heads, cam, intake, wheels, tires, brakes, etc. etc. those are all things that "could" be put back stock if you so desired. If you were to flare the wheel wells, install a t-top roof, etc well that would be very hard to undo. But like others have stated, anything unbolted can be bolted back on so you should do what makes you happy and not worry about resale value.
 
Reactions: Hoytster

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,238
2,942
224
Vass, NC
Jan 10, 2018
#13
  • Jan 10, 2018
  • #13
Don't forget that *how* something is modded really matters if you want to keep or increase value. Man, you can just tell when someone had a car they built to hold onto for a long time vs. someone that just wanted to do it as cheaply as possible only intending to use it for a while.
 
Reactions: General karthief and 95BlueStallion
R

rogerblose

Member
Jan 11, 2007
53
11
19
Jan 10, 2018
#14
  • Jan 10, 2018
  • #14
Check out the Scottsdale BJ line up coming next week. Starting at lot #1561, they have 18 Fox mustangs in a row to be sold on Sunday. Never saw this done before. This may answer your question about stock or modified!
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Jan 10, 2018
#15
  • Jan 10, 2018
  • #15
As long as you keep the stock stuff.....I don't see a reason not to mod it.

However, 4 cylinder shells are pretty cheap......and who cares what you do to them ?

You can only improve on the selling price of a 4 banger by correctly swapping it to v8....and, tastefully, modding the hell outta them.
 

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,238
2,942
224
Vass, NC
Jan 10, 2018
#16
  • Jan 10, 2018
  • #16
rogerblose said:
Check out the Scottsdale BJ line up coming next week. Starting at lot #1561, they have 18 Fox mustangs in a row to be sold on Sunday. Never saw this done before. This may answer your question about stock or modified!
Click to expand...
I think/hope these are the ones you're referring to:
https://www.barrett-jackson.com/Events/Event/Details/1979-FORD-MUSTANG-COBRA-214565


https://www.barrett-jackson.com/Events/Event/Details/1982-FORD-MUSTANG-GT-FASTBACK-214651


https://www.barrett-jackson.com/Events/Event/Details/1983-FORD-MUSTANG-GT-214684


https://www.barrett-jackson.com/Events/Event/Details/1983-FORD-MUSTANG-GT-CONVERTIBLE-214650


https://www.barrett-jackson.com/Events/Event/Details/1983-FORD-MUSTANG-GT-CONVERTIBLE-214652


https://www.barrett-jackson.com/Events/Event/Details/1984-FORD-MUSTANG-GT-214736


https://www.barrett-jackson.com/Events/Event/Details/1984-FORD-MUSTANG-GT350--214734


https://www.barrett-jackson.com/Events/Event/Details/1985-FORD-MUSTANG-GT-CONVERTIBLE-215226

https://www.barrett-jackson.com/Events/Event/Details/1986-FORD-MUSTANG-SVO-214735


https://www.barrett-jackson.com/Events/Event/Details/1987-FORD-MUSTANG-GT-CONVERTIBLE-214740


https://www.barrett-jackson.com/Eve...8-FORD-MUSTANG-ASC-MCLAREN-CONVERTIBLE-214739


https://www.barrett-jackson.com/Events/Event/Details/1989-FORD-MUSTANG-GT-FASTBACK-214738


https://www.barrett-jackson.com/Events/Event/Details/1990-FORD-MUSTANG-214737


https://www.barrett-jackson.com/Events/Event/Details/1990-FORD-MUSTANG-CONVERTIBLE-214731


https://www.barrett-jackson.com/Events/Event/Details/1991-FORD-MUSTANG-214743


https://www.barrett-jackson.com/Events/Event/Details/1992-FORD-MUSTANG-GT-CONVERTIBLE-214742


https://www.barrett-jackson.com/Events/Event/Details/1993-FORD-MUSTANG-CONVERTIBLE-214745


https://www.barrett-jackson.com/Events/Event/Details/1993-FORD-MUSTANG-CONVERTIBLE-214741


I post 'em up because I am interested to see how they do, but also from the pics, I see none with so much as a 5-lug conversion. Although a couple are blown.

Chris
 
Reactions: Audiophile

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Jan 10, 2018
#17
  • Jan 10, 2018
  • #17
It's rare these days to get a chance to drive a totally stock 5.0 Foxbody. When I first got mine it was 100% stock. I took it to a friend who has been working on and modding foxbodies for many years. I was so busy at the time to swap out the ignition switch and key cylinder that I just had him do it. He was positively impressed by the opportunity to drive the 100% stock LX 5.0. He just shook his head and said, "Man, unbelievable its totally stock. Driving it was like, wow" It's modded now, mostly mechanically. But just sharing how cool it is to have one in the state in which it was originally manufactured.
 
Reactions: 95BlueStallion

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jan 11, 2018
#18
  • Jan 11, 2018
  • #18
If I bought another stock fox, here's what I'd do.

#1 3.55 or 3.73
#2. Sn95 Cobra steering rack swap
#3 m-2300-k brakes.


Top it off with a good shifter and cat-back and you have a solid car that has lost zero value. In addition to that, I highly doubt anyone would walk away from a clean car because it had those particular mods.
 
Reactions: 95BlueStallion, FastDriver and JD1964

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,649
214
Acworth, GA
Jan 11, 2018
#19
  • Jan 11, 2018
  • #19
I would do what makes you happy. Foxbodies weren't that great in the quality department, and they are falling apart these days. That being said, it's the original parts in good condition that hold value. If your car is that good, those parts will always be where the money is. Particularly the interior. There are still a lot of foxbodies out there, and there probably will still be a lot of foxbodies out there after the zombie apocalypse. Someone will alway be willing to pay for good OEM parts.

Kurt
 

cleanLX

Founding Member
Jan 17, 2001
976
537
144
Jan 13, 2018
#20
  • Jan 13, 2018
  • #20
FastDriver said:
I think/hope these are the ones you're referring to:
https://www.barrett-jackson.com/Events/Event/Details/1990-FORD-MUSTANG-214737

Chris
Click to expand...
must obtain...
 
Reactions: FastDriver and BlakeusMaximus
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Fox Traction control
  • Sparky714
  • Thursday at 4:54 PM
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
286
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sunday at 9:49 AM
nicholase
G
New Owner: Very Clean 1991 GT Convertible. All original with 21k original Miles. How to make it better?
  • gvanginkel403
  • Oct 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
31
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 17, 2025
Jarhead67
J
Fox Brake pedal too stiff
  • keel
  • Sep 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
33
Views
946
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Wednesday at 9:17 AM
keel
D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
376
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2026
Ryu
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?