• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

stress cracks?

  • Thread starter Thread starter lollerskatz
  • Start date Start date Jun 15, 2006
L

lollerskatz

New Member
Jun 15, 2006
3
0
0
Jun 15, 2006
#1
  • Jun 15, 2006
  • #1
Hi, i am new to stangnet and am currently in the market for a foxbody mustang. I recently saw one near Detriot and it was pretty nice, stock 5.0L, Red, vert, 77,000 miles. It was a very clean car but i noticed that there are a few stress cracks under the door panel in the frame on the driver and passenger side. these cracks are small but i am kind of concerned. i may be getting worried over nothing, but is this a big problem?, what could it lead to? and if its bad how would i go about fixing it? any advise would be greatly appreciated.

thanks, Brendan
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jun 15, 2006
#2
  • Jun 15, 2006
  • #2
Cracks are really never good on a fox body. Our frame is pretty weak to begin with so any weakening really hurts it. Subframes might be able to help which is typically one of the first mods we do to help. If you can get a pic that would help a lot but if you really want to get it, I suggest some full length subframes welded in.
Kevin
 
R

R2D2

Jun 15, 2006
#3
  • Jun 15, 2006
  • #3
weld in subframe connectors help any car not only fox unibodys.
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jun 15, 2006
#4
  • Jun 15, 2006
  • #4
Car might have been driven hard and just swapped engines maybe. Check for other symptoms of hard driving/abuse.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 15, 2006
#5
  • Jun 15, 2006
  • #5
lollerskatz said:
Hi, i am new to stangnet and am currently in the market for a foxbody mustang. I recently saw one near Detriot and it was pretty nice, stock 5.0L, Red, vert, 77,000 miles. It was a very clean car but i noticed that there are a few stress cracks under the door panel in the frame on the driver and passenger side. these cracks are small but i am kind of concerned. i may be getting worried over nothing, but is this a big problem?, what could it lead to? and if its bad how would i go about fixing it? any advise would be greatly appreciated.

thanks, Brendan
Click to expand...


A) Welcome to :SNSign:

B) Carfax it! You can't tell a 77k car from a well kept 177k car sometimes

C) If it has stress cracks on the frame, she's had a hard 77k, however, if it is truly 77k I say go for it
 

carbed87

Member
Jun 5, 2005
215
0
16
Jun 15, 2006
#6
  • Jun 15, 2006
  • #6
weld em up if you absolutely love the car, but in reality... there are sssooooooo many foxes, so don't just settle for one, be patient.

oh, and wlecome.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jun 15, 2006
#7
  • Jun 15, 2006
  • #7
Welcome to :SNSign:

At the bottom of the doorjamb is a lap joint where the front and rear sections of the car are put together and welded... Is this the area we are talking about? If so, there should be a very noticable crack or seam. IF we are talking about real stress cracks, make sure the car is sitting straight. If everything checks out, weld on some subframe connectors ASAP and get a strut tower brace for that bad boy! A convertible Fox Mustang as the same bending resistance of a wet noodle.

P.S. Check out the Buying tips thread to familiarize yourself with common problems with these era cars. CLICK Good luck in your quest!
 
L

lollerskatz

New Member
Jun 15, 2006
3
0
0
Jun 15, 2006
#8
  • Jun 15, 2006
  • #8
thanks guys, the cracks were under the wheel well twords the front kind of by the doors, (it look like someone had been doing too many burn outs) i think i'm gonna pass on this one. Thanks again for the advise.

Brendan
 
You must log in or register to reply here.

Similar threads

R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
512
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
333
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
G
Intro and FB questions
  • gflat65
  • Nov 16, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
301
1965 - 1973 Classic Mustangs -General/Talk- Nov 25, 2025
horse sence
Interior and Upholstery Best vinyl adhesive for door panels?
  • wobbyguy
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 31, 2025
limp
S
Fox New to me 82 GT
  • Stangman7082
  • Jan 20, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
41
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 18, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?