Ok, I buy rear ends from the junk yard to part out and this is the 4th time this has happened to me !@#%!!!!! Can't they think of something better or make stronger bolts?!?
In case I am not calling it the correct name when I call it the Carrier pin locking bolt - I am reffering to the small bolt the threads into the carrier and has a pin that passes through the large carrier pin which holds the axles tight so the C-clips don't fall off.
I was thinking of trying a left handed drill bit, but I believe all of the part of the bolt that has threads on it came out, so what's left of the bolt in there has no threads on it. I tried standing the whole rear on end and tapping it with a hammer and letting gravity help, but no luck. Also tried small magnet with no luck.
Anything I can do short of cutting the h@ll out of the carrier??
In case I am not calling it the correct name when I call it the Carrier pin locking bolt - I am reffering to the small bolt the threads into the carrier and has a pin that passes through the large carrier pin which holds the axles tight so the C-clips don't fall off.
I was thinking of trying a left handed drill bit, but I believe all of the part of the bolt that has threads on it came out, so what's left of the bolt in there has no threads on it. I tried standing the whole rear on end and tapping it with a hammer and letting gravity help, but no luck. Also tried small magnet with no luck.
Anything I can do short of cutting the h@ll out of the carrier??