Progress Thread Stykthyn Tries It Again

FoxMustangLvr · Oct 9, 2015

hoopty5.0 said:
That's a good question and I have no clue. I will look

@hoopty5.0
How did you clear 17X9 wheels with coil overs? Does the UPR Kmember help with the clearance? I called UPR and asked if their coil over conversion kit would work with my factory Kmember and 17x9 wheels and they said NO! Any insight?

stykthyn · Oct 9, 2015

This may be why mm suggests running 96+ spindles.

hoopty5.0 · Oct 9, 2015

FoxMustangLvr said:
@hoopty5.0
How did you clear 17X9 wheels with coil overs? Does the UPR Kmember help with the clearance? I called UPR and asked if their coil over conversion kit would work with my factory Kmember and 17x9 wheels and they said NO! Any insight?

I've run 18x9s as well. The K member wont help anything as it uses all the same mounting points. Im running SN A-arms, but again, I dont think that affects anything. I have plenty of clearance. Maybe its a 17x8 wheel?

hoopty5.0 · Oct 9, 2015

These were the 18x9s on the original hoopty. you can see it was close, but I had to move the nut up anyway for more ride height.

hoopty5.0 · Oct 9, 2015

I also remembered that that is a standard V8 FOX spindle with a mark 7 rotor, soooo, may not apply here.

stykthyn · Oct 9, 2015

Well I just sent mm a list of my current parts and will see what they say. Just reading across forums like corral and corner carvers it looks like the shorter 8-10" springs put the collar above the wheel and avoid contact. Will see what the pros suggest.

hoopty5.0 · Oct 9, 2015

Ooo that'll be stiff

FoxMustangLvr · Oct 9, 2015

The 10" and shorter are about 300# and higher spring rates and are for "corner carvers" which will make your car not street friendly. That's a track only spring. Only 12"-14" springs are for street in the 200-250# spring rate.

FoxMustangLvr · Oct 9, 2015

@hoopty5.0
Thanks for the picks. I have the 03' cobra reps 17x9 with 255's and I love these wheels but I want coil overs because I hate r&r'ing springs and I want adjustable height. I'm in a pickle.

stykthyn · Oct 9, 2015

FoxMustangLvr said:
@hoopty5.0
Thanks for the picks. I have the 03' cobra reps 17x9 with 255's and I love these wheels but I want coil overs because I hate r&r'ing springs and I want adjustable height. I'm in a pickle.

Agreed. You and I are in the same boat with this one. I have 17x9 fr500s up front. I'm hoping the sn length arms will be the golden ticket here.

A5literMan · Oct 9, 2015

I'm not 100% sure if I have 17x9 or 17x8 Cobra r's on mine(wheels cam with car). I do have 245/45 17 tires on it and they clear. Mines still stock 4 lug with UPR bumpsteer kit and mm c&c plates and coilovers. Not sure if any of that matters/helps. 255's would surely rub though IMO

Boosted92LX · Oct 9, 2015

stykthyn said:
Agreed. You and I are in the same boat with this one. I have 17x9 fr500s up front. I'm hoping the sn length arms will be the golden ticket here.

I'm curious now.. I have 18x9 up front with konis and eibach coilsprings. Wanted to go coilovers but thought it wasn't doable. Will be interested how to pull it off and have a nice riding car..

hoopty5.0 · Oct 9, 2015

I'll take pics of the current setup too. The fenders are still off so it should be easy to tell what's going on

hoopty5.0 · Oct 10, 2015

Please excuse everything else you see wrong in the picture and look only at the coilovers

Boosted92LX · Oct 10, 2015

hoopty5.0 said:
Please excuse everything else you see wrong in the picture and look only at the coilovers

Those are 17x9?

hoopty5.0 · Oct 10, 2015

Boosted92LX said:
Those are 17x9?

Yep. The tires are 245s as well

Boosted92LX · Oct 10, 2015

hoopty5.0 said:
Yep. The tires are 245s as well

Oh ok. I have a 265.. might be too tight.

89oem · Oct 10, 2015

No, Im running 300# over my KYB's handling and ride is awesome.

MM reverse offset 94/95 spindle and MM K

17x8 SSC and comp 2 245/45

Zero rattle etc

200# is for a track car as it allows weight to shift to rear is what I understand... Cant recall length but I think 12", Longer and you get too long a spring and it "curves" on compression...

FoxMustangLvr · Oct 10, 2015

hoopty5.0 said:
Please excuse everything else you see wrong in the picture and look only at the coilovers

Are your SN95 arms pushing your wheel out a bit farther? Is the spring in compression in that picture with the jack under the arm or is it hanging?

hoopty5.0 · Oct 10, 2015

FoxMustangLvr said:
Are your SN95 arms pushing your wheel out a bit farther? Is the spring in compression in that picture with the jack under the arm or is it hanging?

Don't think so and car is on the ground at ride height

Progress Thread Stykthyn Tries It Again

I love my Pimp

I want to measure mine. It doesn't look that tall.

mechanicus terribilis

mechanicus terribilis

mechanicus terribilis

I want to measure mine. It doesn't look that tall.

mechanicus terribilis

I love my Pimp

I love my Pimp

I want to measure mine. It doesn't look that tall.

At least it is lumpy...

It's only an inch or two. What's the big deal?

mechanicus terribilis

mechanicus terribilis

Attachments

It's only an inch or two. What's the big deal?

mechanicus terribilis

It's only an inch or two. What's the big deal?

Mustang Master

I love my Pimp

mechanicus terribilis

Similar threads

Privacy & Transparency

Privacy & Transparency