So after 105000 miles and 8 years I need new inner tie rods and balljoints. So I Figure why not upgrade those wornout struts n shocks. So I figure the tokico HP seem like a great bang for the buck. So I figure why not throw some springs in the mix but I only want a 1/2 to 3/4 max drop with 600lbs+ rates.
Where can I find the billet/mach 1 Springs? How about quad shocks? Are the billet kits/mach 1 kits a good value or is it better to get the Tokico HP struts/shocks n the springs separate. I don't want to lower to much because I don't want to spend on X2 balljoints, bump steer and cast n camber kit. Plus roads are bad in south Texas and I bottom out on speed bumps already.
Thanks.
Where can I find the billet/mach 1 Springs? How about quad shocks? Are the billet kits/mach 1 kits a good value or is it better to get the Tokico HP struts/shocks n the springs separate. I don't want to lower to much because I don't want to spend on X2 balljoints, bump steer and cast n camber kit. Plus roads are bad in south Texas and I bottom out on speed bumps already.
Thanks.