• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Sweet deal on tranny

  • Thread starter Thread starter My Black Beast
  • Start date Start date Jul 31, 2004

My Black Beast

Founding Member
Jul 18, 2002
83
0
0
Lakeland, FL
Jul 31, 2004
#1
  • Jul 31, 2004
  • #1
Man, I got a great deal on a tranny today. First off I gotta say how GAY my junkyards are here in lakeland. I went around to 3 of them looking for a 4 cyl tranny from a mustang (not even the better TC one). One quoted $400, another $200 but it was in another city, and the last $450. I told them that they were nuts.


So anyways, I see a friend at the last place and he tells me about the Copher's U pull it place in Tampa (45 min away). So me and my friend goes. They had tons of cars and even 2 turbocoupes with engine and trannys (minus the turbo and exhaust).

I pulled the tranny out (about 1.5 hours of work and on gravel rocks), front sway bar, K-member support bar, EGR valve (I cracked mine...oops), and an IAC valve for '98 explorer (for my friend) for $83 plus if I bring them back one of my trannys they will give me another $20 back.

That is the sweetest deal that I have ever seen. I love that place and my 2.3T project should be ready by the end of the week.
 

My80Cobra

Founding Member
Oct 31, 2002
228
0
0
Spokane, WA
Jul 31, 2004
#2
  • Jul 31, 2004
  • #2
Sounds like a great deal to me. I bought a really tore up 87 Mustang at an auction for $80. I got a perfect t-5 and new headlights and so much interior stuff that I sold on e-bay. I made over $300 on that car and I had it for 24 hours. I sold it to the local Pull & Save for $50 I like those kind of deals..
 

Asha'man

Founding Member
Feb 5, 2002
1,909
0
0
Denver
Jul 31, 2004
#3
  • Jul 31, 2004
  • #3
Yeah, the right junkyard can make your life much easier. I got a clutch cable, two dogbone cables, a clutch fork, the related horseshoe clips for the bellcrank, and a nice piece of driver's side window trim for $12 the other week.

Ash
 

mr_woodster

Active Member
Jul 28, 2003
1,314
0
36
Riverside, CA
Aug 1, 2004
#4
  • Aug 1, 2004
  • #4
FYI: all t-5's 86 and later are world class t-5s borgwarners, turbocoupes/mustangs alike. (pretty sure on this one, its late though...)
 

svoman2300

New Member
May 12, 2003
84
1
0
Pompano Beach, Fl
Aug 1, 2004
#5
  • Aug 1, 2004
  • #5
mr_woodster said:
FYI: all t-5's 86 and later are world class t-5s borgwarners, turbocoupes/mustangs alike. (pretty sure on this one, its late though...)
Click to expand...
Yup, You would be better off trying to find a tranny out of a 90-93 4 cyl LX. Pretty much the same gear ratio as the Turbocoupe but half the horespower going through during it's life and a few years newer. Better chance of the LX one being in good shape. Also any type of junkyard that they pull the parts for you will be double or triple a Upullit type yard. If your yard offeres a warranty like mine does. You can go back as many times as you need until you find a good one. But I don't know how you value your time.
 

My Black Beast

Founding Member
Jul 18, 2002
83
0
0
Lakeland, FL
Aug 1, 2004
#6
  • Aug 1, 2004
  • #6
I thought I have heard from several people on here and on Ebay that the 87-88 TC tranny had stronger innards like the 5.0's. But that they have the bellhousing and input shaft of the 2.3. I don't know. My ultimate goal in the next year or two is to have it put down around 300rwhp. We'll see.

It was easy getting stuff from this junkyard to because every car was lifted up about 2 feet off the ground.

Also this place says that they have a 31 day Money Back gaurantee. Hopefully though I won't have to use that.
 

svoman2300

New Member
May 12, 2003
84
1
0
Pompano Beach, Fl
Aug 2, 2004
#7
  • Aug 2, 2004
  • #7
My Black Beast said:
I thought I have heard from several people on here and on Ebay that the 87-88 TC tranny had stronger innards like the 5.0's.
Click to expand...
It's BS . The Turbocoupe tranny isn't any stronger than a typical 4 cyl T5. What makes a 5.0 tranny "stronger" or being able to handle more power and torque is because of the higher gear ratios in the tranny. Less teeth per gear means more metal per gear hence stronger. The materials used to make the gears aren't any different. If your goal is 300 hp you'll probably want to put a 5.0 tranny in anyways because 1st gear will be almost useless.
 

351wcoupe

New Member
Feb 13, 2003
1,811
0
0
Manhattan, Kansas
Aug 2, 2004
#8
  • Aug 2, 2004
  • #8
lol ok everybody pay attention to svoman2300. When he says 1st gear is useless @ 300hp I believe it. I should be around that mark on spray and I go about 40ft before I shift. I used to at least be able to run to the end of the 60' pad.
 
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
289
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
89 LX Electrical Troubles
  • fun331
  • Oct 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
353
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 27, 2025
fun331
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
567
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
914
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?