Sweet link with TONS of diffrent heads and their flow numbers!

[95CobraMike]

Its a sweet link for anyone looking to buy heads or if you want to have a rough estimate of what your heads flow.... Thers is LOTS of info on there....they have stock numbers for most heads (stock and aftermarket) and for some heads they have numbers for stage 1, 2 and 3! its a sweet link, check it out

http://www.jason.fletcher.net/tech/flowdata/castiron.htm

 

[4Jenna]

Thx great link

 

[95CobraMike]

thank you for saying that

 

[95CobraMike]

no one likes my link?

 

[super302]

good link

 

[nmcgrawj]

Thats a good link(looks like you're lookin for attention ) but flow numbers can be deceiving(sp?). Depends on how they flow it, what machine, and from what i hear it can be "helped" quite a bit.

Mike Curcio did my heads at CCRP and according to that link my twisted wedge heads have a "stage 3" port job on the intake, the exhaust is only about a stage 1. Mike calls it a "street/strip" port job