• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

t-5 question...

  • Thread starter Thread starter JJs89lx
  • Start date Start date Apr 1, 2007
J

JJs89lx

Member
Aug 24, 2006
39
0
6
Apr 1, 2007
#1
  • Apr 1, 2007
  • #1
I was kinda cruising around today... Just had my tranny rebuilt.... Was in 5th gear... doing about 80 and started gaining speed... (didnt relize till...) i was at about a 100 and then the tranny i guess let go? and it was like it was in N?
I have 1*2*3*4*R but no fitfh gear! all i have is my 373 gears and the rebuilt tranny with a full exhaust! Thats as far as i know... Any reasons why i would lose fitfh gear like that? and is it ok to drive around a little while with 5th gone like it is?
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Apr 1, 2007
#2
  • Apr 1, 2007
  • #2
i had the EXACT same thing happen to me.
there is a small retaining ring that holds 5th gear on, if the ring breaks or comes loose the gear can slide off the shaft and cause your problem having no 5th. i'd take it out and give it to the guy that rebuilt it for you and have him fix it
 
J

JJs89lx

Member
Aug 24, 2006
39
0
6
Apr 1, 2007
#3
  • Apr 1, 2007
  • #3
Hmmm... Im so glad to know That!!!! it sucks running around in forth gear! Thanks!
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 1, 2007
#4
  • Apr 1, 2007
  • #4
samething happened to one of my t-5's. Have yet to take it apart and fix it.
 
9

91stangy

Member
Jun 11, 2003
116
0
16
Apr 2, 2007
#5
  • Apr 2, 2007
  • #5
He's right about the ring holding on 5th. The exact thing happened to me last summer. I had my transmission rebuilt and two days later, I lost 5th. I took it back and they tried to tell me I was beating on my car which I wasn’t, after an argument, the customer won and they fixed it.
 

Quikstang

Founding Member
Mar 9, 2000
846
0
0
Orlando FL
Apr 3, 2007
#6
  • Apr 3, 2007
  • #6
yep.. Been there done that. ;-) Easy fix... unless your payin a shop to do it.
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
343
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
918
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
189
The Welcome Wagon Jul 3, 2026
5150K
5
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
900
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
801
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?