• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

T5 gurus, broken T5, reverse problems, linkage questions

  • Thread starter Thread starter GToddyT5
  • Start date Start date Jul 27, 2006

GToddyT5

Founding Member
Jan 14, 2002
553
0
16
Hamilton, NJ
Jul 27, 2006
#1
  • Jul 27, 2006
  • #1
OK, I broke my T5 a while back doing a burnout in reverse cuz I'm a moron.

That aside, I can get the car into reverse, but I try to let the clutch out and it will grind and not move. Then I have to turn the car off to get it out. I have since stopped using reverse. The car still goes into 5th, but feels very sloppy. And it only seems to come out easily at certain RPMs, around 2500, when I need to get it into neutral. Otherwise I have to pull on it pretty hard. So, my question is, is this a linkage problem? What exactly is the linkage and where is it? What else could be my problem? How much would this cost a shop to fix, what does it entail?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 28, 2006
#2
  • Jul 28, 2006
  • #2
Does It work OK if you shift into 4th first and then reverse? Are any of the other gears hard to get into?
 

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0
Nov 19, 2005
815
5
18
mooresville, nc
Jul 28, 2006
#3
  • Jul 28, 2006
  • #3
pr0bably g0nna be l00king a big bucks t0 have a sh0p pull it and g0 thr0ugh it. alm0st n0t w0rth it, since t5s are easy t0 c0me by. my suggesti0n w0uld be t0 find a g00d used 0ne and have a sh0p put new synchr0s and bearings in it and than put it in y0ur car, and than rebuild y0urs and sell it t0 try and make s0me 0f the m0ney back.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Jul 28, 2006
#4
  • Jul 28, 2006
  • #4
dragnazz5.0 said:
pr0bably g0nna be l00king a big bucks t0 have a sh0p pull it and g0 thr0ugh it. alm0st n0t w0rth it, since t5s are easy t0 c0me by. my suggesti0n w0uld be t0 find a g00d used 0ne and have a sh0p put new synchr0s and bearings in it and than put it in y0ur car, and than rebuild y0urs and sell it t0 try and make s0me 0f the m0ney back.
Click to expand...

Um….yeahhhhhh, it makes me nauseous to read your posts!
 

GToddyT5

Founding Member
Jan 14, 2002
553
0
16
Hamilton, NJ
Jul 28, 2006
#5
  • Jul 28, 2006
  • #5
jrichker said:
Does It work OK if you shift into 4th first and then reverse? Are any of the other gears hard to get into?
Click to expand...
I haven't tried this. Why would that make a difference? No, none of the other gears are hard to get into.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jul 28, 2006
#6
  • Jul 28, 2006
  • #6
You blew the reverse idler gear, and probably damaged the counter gear and 1-2 synchro slider.


Burnouts in reverse are bad m'kay. If you ever saw the reverse idler gear you would be afraid. It's a tiny little gear with really no strenght to it at all. You load it up like that and it will shear teeth.

5th is feeling funny because reverse operates ont he same linkage as 5th gear. If reverse gear is damaged it will interfere with 5th.

Best case scenario you have to replace the idler gear, which is a $40 part.

Worst case scenario, idlers ($40) countergear ($200) 1-2/reverse synchro slider ($80)
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Jul 28, 2006
#7
  • Jul 28, 2006
  • #7
GToddyT5 said:
I haven't tried this. Why would that make a difference? No, none of the other gears are hard to get into.
Click to expand...

You see, the t5 tranny among others has no reverse syncro. Shifting into 4th or 5th first assists the tranny in meshing the reverse gears by getting everything close to the proper speed. Hell, I do it out of habit now anyways.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jul 28, 2006
#8
  • Jul 28, 2006
  • #8
millhouse said:
You see, the t5 tranny among others has no reverse syncro.
Click to expand...


Late 93 to 1995 T-5s do have a reverse synchro.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Jul 28, 2006
#9
  • Jul 28, 2006
  • #9
Mustang5L5 said:
Late 93 to 1995 T-5s do have a reverse synchro.
Click to expand...


Oops...how forgetfull I can be.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jul 28, 2006
#10
  • Jul 28, 2006
  • #10
It can be retrofitted to earlier t-5's as well. I'm trying to locate the parts to do so right now on a t-5 i am rebuilding
 
You must log in or register to reply here.

Similar threads

T5 identification
  • 3054tony
  • May 16, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
859
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
AeroCoupe
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
575
Other Auto Tech Mar 3, 2026
Noobz347
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
900
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
562
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?