T5 gurus, broken T5, reverse problems, linkage questions

GToddyT5

Founding Member
Jan 14, 2002
553
0
16
Hamilton, NJ
:bang: :bang: :bang: OK, I broke my T5 a while back doing a burnout in reverse cuz I'm a moron.

That aside, I can get the car into reverse, but I try to let the clutch out and it will grind and not move. Then I have to turn the car off to get it out. I have since stopped using reverse. The car still goes into 5th, but feels very sloppy. And it only seems to come out easily at certain RPMs, around 2500, when I need to get it into neutral. Otherwise I have to pull on it pretty hard. So, my question is, is this a linkage problem? What exactly is the linkage and where is it? What else could be my problem? How much would this cost a shop to fix, what does it entail?
 
pr0bably g0nna be l00king a big bucks t0 have a sh0p pull it and g0 thr0ugh it. alm0st n0t w0rth it, since t5s are easy t0 c0me by. my suggesti0n w0uld be t0 find a g00d used 0ne and have a sh0p put new synchr0s and bearings in it and than put it in y0ur car, and than rebuild y0urs and sell it t0 try and make s0me 0f the m0ney back.
 
dragnazz5.0 said:
pr0bably g0nna be l00king a big bucks t0 have a sh0p pull it and g0 thr0ugh it. alm0st n0t w0rth it, since t5s are easy t0 c0me by. my suggesti0n w0uld be t0 find a g00d used 0ne and have a sh0p put new synchr0s and bearings in it and than put it in y0ur car, and than rebuild y0urs and sell it t0 try and make s0me 0f the m0ney back.

Um….yeahhhhhh, it makes me nauseous to read your posts!
 
You blew the reverse idler gear, and probably damaged the counter gear and 1-2 synchro slider.


Burnouts in reverse are bad m'kay. If you ever saw the reverse idler gear you would be afraid. It's a tiny little gear with really no strenght to it at all. You load it up like that and it will shear teeth.

5th is feeling funny because reverse operates ont he same linkage as 5th gear. If reverse gear is damaged it will interfere with 5th.

Best case scenario you have to replace the idler gear, which is a $40 part.

Worst case scenario, idlers ($40) countergear ($200) 1-2/reverse synchro slider ($80)
 
GToddyT5 said:
I haven't tried this. Why would that make a difference? No, none of the other gears are hard to get into.

You see, the t5 tranny among others has no reverse syncro. Shifting into 4th or 5th first assists the tranny in meshing the reverse gears by getting everything close to the proper speed. Hell, I do it out of habit now anyways.