t5 help

[JNB0505]

how do i remove the offset lever

 

[jrichker]

Offset lever???

See TTC: Product Literature to download a FREE service manual for T5 or Tremec 3550/TKO
You will need the Adobe Acrobat viewer which is also a free download – Adobe - Adobe Reader Download - All versions

See Hanlon Motorsports - T5 and Tremec parts, sales and service or http://www.ddperformance.com for parts

A T5 rebuild kit with syncros, bearings and other small parts costs about $160. It does not include any gears or shafts.

Hanlon Motorsports - T5 and Tremec parts, sales and service also has a video on how to rebuild your T5 or Tremec. It costs about $20, and is worth every penny of it.

 

[Mustang5L5]

What offset lever you talking about?

 

[DrMaxit]

WTFS and offset lever? you talking about the shift lever?

--Chuck

 

[JNB0505]

the manuale says its an off set lever its what the shifter goes in

 

[Mustang5L5]

Ah


It's page 3-4 of the tremec service manual. Most call it the shifter block. There is a roll pin holding it on the shift rail. You need to drive it through with a punch.

 

[v8only]

however, it still won't come out till you unbolt the tail shaft and slide it all back. why would you want to only remove this piece??

 

[JNB0505]

thank you very much