• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

T5 shaft question

  • Thread starter Thread starter sweet88gt
  • Start date Start date Oct 31, 2005

sweet88gt

Member
Jun 25, 2005
334
0
16
Venice FL
Oct 31, 2005
#1
  • Oct 31, 2005
  • #1
Recently I had the pleasure of damaging yet another t5 tranny. I have a t5z and on the entrance to the interstate I decided to go for a high speed run. When shifting into 5th I must have chewed up the syncros. Is 1st and 5th on the same shaft? When I ease into 5th no problems, but if I am at any speed above 55mph it will grind. Does anyone know where I can get a exploded diagram of the tranny?? Thanks
 

vikingpower

New Member
Dec 6, 2004
656
0
0
CWU Ellensburg, WA
Oct 31, 2005
#2
  • Oct 31, 2005
  • #2
I've read in many publications powershifting into 5th gear is not recommended with a t-5, the gear isnt hardened if I remember correctly
 

sweet88gt

Member
Jun 25, 2005
334
0
16
Venice FL
Oct 31, 2005
#3
  • Oct 31, 2005
  • #3
The problem wasnt with a powershift as much as these trannys just dont hold up well. I have never powershifted but it does see its abuse 1st thru 4th. This time I shifted into 5th at a excessive speed I figured the syncros just werent up to the task. Another lesson learned.
 
I

iapexl8r

Member
Apr 1, 2005
254
0
17
Nov 1, 2005
#4
  • Nov 1, 2005
  • #4
http://www.ttcautomotive.com/English/media/pdfs_autogen/T-5_Service_Manual.pdf good luck I just did one but I updated it to the g force dog ring kit and it rules. a little rough around the edges but high speed shifts w/no clutch are worth it. so far it has held up great. chris
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Nov 1, 2005
#5
  • Nov 1, 2005
  • #5
tremec has free manuals for all their products on their site, including the t5.
 

sweet88gt

Member
Jun 25, 2005
334
0
16
Venice FL
Nov 1, 2005
#6
  • Nov 1, 2005
  • #6
iapexl8r said:
http://www.ttcautomotive.com/English/media/pdfs_autogen/T-5_Service_Manual.pdf good luck I just did one but I updated it to the g force dog ring kit and it rules. a little rough around the edges but high speed shifts w/no clutch are worth it. so far it has held up great. chris
Click to expand...
Thanks, thats what I was looking for.
 

Cobra1894

New Member
Oct 7, 2003
196
0
0
Broken Arrow, OK
Nov 1, 2005
#7
  • Nov 1, 2005
  • #7
I had the same problem and changed the Oil to Redline. It works greats now.
 
D

DouglasOhio

New Member
Jul 25, 2004
116
0
0
Canton Ohio
Nov 1, 2005
#8
  • Nov 1, 2005
  • #8
the fifth gear synchro is made of brass hence it cant handle the high rpm 4-5 shift. The reason it probably grinds every time now is because the raised ridges on the synchro that grabs the gear are probably smashed flat, or worn and it cant grab the gear as well (above 55 in your case) Ive rebuilt my tranny twice this summer, the second time cuz i used a cheap ebay synchro kit and 1-2 and 4-5 wore out just over the summer. I got a ford racing kit and its much better now.
 

sweet88gt

Member
Jun 25, 2005
334
0
16
Venice FL
Nov 1, 2005
#9
  • Nov 1, 2005
  • #9
On a side note, How hard is the t56 swap?? Are there are drawbacks to the six speed?? I am done messing around and need to limp this along until funds are ready. I would be using it mainly for the weekend toy, yet easy enough for the wife. Any suggestions welcomed.
 

Euphoric306

New Member
Apr 5, 2004
905
0
0
Nov 2, 2005
#10
  • Nov 2, 2005
  • #10
just tore apart my t5 second time, first for a complete rebuild, second because the cheap rebuild kit had cheap parts, and one of the 3-4 slider uh... things. they go between slider and the slider splines and rock back and forth on the c-springs, dunno wut to call them, anyway one broke and lodges itself into the synchro... **** happens
 
You must log in or register to reply here.

Similar threads

T5 5th gear 89 gt
  • mac_55
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
279
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 20, 2026
Mustang5L5
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
345
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
J
88 Foxbody 5.0 Driveshaft Issue! Need Help
  • James Hood
  • May 1, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
570
Fox 5.0 Mustang Tech May 1, 2025
AeroCoupe
Drivetrain T5 issues
  • Carpenter78
  • Apr 26, 2024
  • Fox 5.0 Mustang Tech
Replies
8
Views
1K
Fox 5.0 Mustang Tech Apr 26, 2024
AeroCoupe
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
796
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?