• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

T5 Whine 1st-3rd

  • Thread starter Thread starter Turkey Sammich
  • Start date Start date Jul 13, 2007

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 13, 2007
#1
  • Jul 13, 2007
  • #1
On Wednesday the T5 came out, and the speedo gear was placed back in (Don't ask). It was driven twice that day less than a mile, once to test, once on the way home.

I noticed this morning after about 4 miles, I noticed a whine. I thought it was someone elses car, and when turning onto another street, I continue to hear the noise. It only makes the whine in first if you push it more than normal 5-8mph parking lot speed. Once you get it into 2nd you can hear it. 3rd gear is loudest.

4th & 5th nothing.

I'm figuring one of 3 things.
- The T5 is going bad, low on T5 fluid, or gears?
 

Nibbie

New Member
Mar 10, 2007
127
0
0
Jul 13, 2007
#2
  • Jul 13, 2007
  • #2
Youl could be low on fluid but its common for T-5's to wine a little bit, mine wines also but it aint to loud. does it vibrate or make the shifter vibrate a little bit?
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 13, 2007
#3
  • Jul 13, 2007
  • #3
The shifter itself vibrates and Im convicedit leaks tranny fluid but no one believes me.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 14, 2007
#4
  • Jul 14, 2007
  • #4
Could it be the (Imdrunk spelling sucks)bearings?
 

Nibbie

New Member
Mar 10, 2007
127
0
0
Jul 14, 2007
#5
  • Jul 14, 2007
  • #5
it could be the bearings making noise, also you might want to make sure the tranny bolts to the bell housing are still there. I have seen them missing before and it made the shifter vibrate like crazy.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 14, 2007
#6
  • Jul 14, 2007
  • #6
Im pretty sure its there lol Though I continue to hear its the bearings.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 14, 2007
#7
  • Jul 14, 2007
  • #7
Think about the operation of the trans: 1st-3rd use the countershaft to pass power from the input shaft to the rest of the gears. Fourth gear is direct drive, so it doesn't use the countershaft. Fifth gear reduces the RPM's that the countershaft turns, so you may not be going fast enough in 5th to make it noticeable. Fluid level is important, use Dextron ATF for lubricant.

See http://www.hanlonmotorsports.com/HanlonTIC.html for more help.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 14, 2007
#8
  • Jul 14, 2007
  • #8
jrichker said:
Think about the operation of the trans: 1st-3rd use the countershaft to pass power from the input shaft to the rest of the gears. Fourth gear is direct drive, so it doesn't use the countershaft. Fifth gear reduces the RPM's that the countershaft turns, so you may not be going fast enough in 5th to make it noticeable. Fluid level is important, use Dextron ATF for lubricant.

See http://www.hanlonmotorsports.com/HanlonTIC.html for more help.
Click to expand...

Thanks, thats exactly what I needed.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,121
224
Massachusetts
Jul 14, 2007
#9
  • Jul 14, 2007
  • #9
Turkey Sammich said:
The shifter itself vibrates and Im convicedit leaks tranny fluid but no one believes me.
Click to expand...



That's your problem right there.

T-5's are VERY sensitive when it comes to fluid levels. When the level drops, the bearings start to starve for fluid and they will start to whine. MOST t-5 whining problems are caused by low fluid levels.

Sometimes if you catch it soon enough, a flush and fill will fix the problem ASAP. But if you let it go long enough it will become permanent.

A t-5 should be silent when everything is working well. A shifter sometimes transmits harnonics, but a shifter gasket can cure this problem. Shifter whine usually gets louder in each increasing gear, but not necessarily.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,121
224
Massachusetts
Jul 14, 2007
#10
  • Jul 14, 2007
  • #10
jrichker said:
Think about the operation of the trans: 1st-3rd use the countershaft to pass power from the input shaft to the rest of the gears. Fourth gear is direct drive, so it doesn't use the countershaft. Fifth gear reduces the RPM's that the countershaft turns, so you may not be going fast enough in 5th to make it noticeable. Fluid level is important, use Dextron ATF for lubricant.

See http://www.hanlonmotorsports.com/HanlonTIC.html for more help.
Click to expand...



Your thinking is 100% correct, but i don't think this is the case here. He states his whine gets louder in each sucessive gear.

The whine you are talking about occurs when the mainshaft that the 16 roller bearings between the input shaft and mainshaft begins to score due to heat and lack of fluid.

When this happens, usually it's loudest in 1st gear and reverse because that's where the greatest speed differential exists between the input and main shaft. In 2nd gear it will become quieter and in 3rd gear even quieter. You may even hear it in 5th but it will be just as quiet as 3rd. 4th gear is silent.

Since he said it started in 2nd gear and got louder in 3rd gear, i don't beleive this is his case.

I've disassembled two t-5's where the whine was loudest in 1st and got quieter and found the mainshaft snout completely scored up from lack of fluid....



which leads me back to my original post....check and change your fluid!!
 

LordMustangGT

Member
Jan 9, 2006
118
0
17
Port Orchard, WA
Jul 14, 2007
#11
  • Jul 14, 2007
  • #11
Mine whined in all the gears right before it blew the input gear.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jul 15, 2007
#12
  • Jul 15, 2007
  • #12
mine whined a little in 3rd than when I put the MGW in it got a little louder and the shifter had a little bit of vibe in 3rd higher rpm's....the shifter gasket I bought made it quiet....but I can still hear a little in 3rd
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jul 15, 2007
#13
  • Jul 15, 2007
  • #13
If it's whining in those gears most likely it is the fluid level, however if the fluid level is good I would be worried that the front bearing is ready to go...usually a tell tale sign of what is to come.

It is best to pull it out and fix it before it lets loose and takes out a lot more... The first time it happened to me it was $570 worth of parts to make mine right, thank god I build the myself.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 15, 2007
#14
  • Jul 15, 2007
  • #14
It was fluid level. It ended up being bone dry. No one believed me that I talked to about the leak, my shop guy that does 80% of time on is mustangs, was saying the seals looked good and didn't believe me, that I was leaking fluid.

The Stang runs fine now. No whine in any gear.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,121
224
Massachusetts
Jul 15, 2007
#15
  • Jul 15, 2007
  • #15
You are probably leaking through the input shaft seal into the bellhousing.
 
You must log in or register to reply here.

Similar threads

Drivetrain 5th Gear Ratio
  • PonyGTrider
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
330
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
915
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
806
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?