Tailights

[Jacob_Royer]

How the crap do you get the tailight lenses off for bulb replacement?? I see no screws??? the bulbs dont apear to go in from the trunk?? Please help!

 

[mustang50v8]

there are 4 screws that hold the tail lights to the car. pull back the trunk lining and look back there.

 

[Jacob_Royer]

So you have to remove the whole assembly to get to the bulbs correct?

 

[96GTstang46]

Just take off the inner lining like mustang50v8 said, and i think there is 4-5 bolts that hold the lights in there.. i am pretty sure its a 10mm deep socket 1/4''... should take ya ten minutes at best! lol

 

[mustang50v8]

So you have to remove the whole assembly to get to the bulbs correct?

that is correct. since it somewhat of a pain in the ass to get to, i would do them all while you got it apart.



well it really isnt that bad to get to, but i am lazy, and i don't like pulling the lights off.

 

[StangYellow]

Pull the carpet back and you will see the screws that hold the light in. I havent replaced mine, but you might be able to pull the carpet back and twist the sockets out. Should take only a few minutes

 

[Mustang5L5]

Yeah it's a PITA.

Figures ford makes the headlights easy as hell to take off but then makes up for it by making the taillights a PITA.

Thanks Ford