Taking the cobra in for alignment after suspension upgrade. Check out these settings.

[01LaserRedCobra]

Well I am done installing my eibach prokit and bilstein shocks/struts front and rear. Along with maximum motorsports CC plates, strut tower brace, and subframes.

The ride quality is awesome and the car grips really good... It does pull to the left a little. I am taking it in for a alignment this week and wanted opinions with these settings?

1. Caster set to 4.25 degrees positive.
(Or ½ way on the caster plate setting which ever is first, but the same degree what ever it may be on both sides)

2. Camber set to .75 degrees negative.

3. Toe-In set to .25 degrees

Thanks,

 

[RIDE-IT]

i have Steeda c/c on my 2002 gt and in their instructions it says:

Caster: 4.5 degrees or more positive
Camber: from .8 to 1.1 degrees negative (for general street use)
toe: 1/32 (same as factory setting)


I dont know if that helps any but i thought i would share that with you.