Tank_567 Turbo build

tank_567 · May 21, 2011

First off let me say that it was not the tune that doomed her or the boost, we made 6 pulls all fine no fuel issue.... 526rwhp/535rwtq....14.5lbs of boost... Oil pump **** the bed @ 5500rpm by the time 6000 came around on the dyno the engine AND the turbo locked up... heads and cams are toast, the crank gone.. Only thing that is usable is the block, rods and pistons. New turbo, built bottom end, heads and cams coming soon, thats all I can say for now.

sneaky98gt · May 21, 2011

Dang dude, that blows (no pun intended). I was literally getting ready to send you a PM to see if you wanted to go down to Fayetteville tomorrow.

Oh well, at least now I know that I will never have any chance versus you with my NPI-powered beast, lol. You still gonna DD it after the new motor build? If so, that is going to be one NASTY driver!

tank_567 · May 21, 2011

sneaky98gt said:
Dang dude, that blows (no pun intended). I was literally getting ready to send you a PM to see if you wanted to go down to Fayetteville tomorrow.

Oh well, at least now I know that I will never have any chance versus you with my NPI-powered beast, lol. You still gonna DD it after the new motor build? If so, that is going to be one NASTY driver!

It sucks, I was getting it ready for the track, it made 520+ in back to back runs on 93oct. Last run for 93 to make sure it was ready for the street, after that pull we were going to do the 110 race gas tune.. Im looking at picking up a new ford fiesta or focus this week for my new DD till I get the cash for the rebuild.

SaleenGT2001 · May 21, 2011

that sucks, i've seen it happen a few times on the 4.6

hard to believe it ruined everything so quickly. usually takes a little more time with no oil for that to happen

SaleenGT2001 · May 21, 2011

that sucks, i've seen it happen a few times on the 4.6

hard to believe it ruined everything so quickly. usually takes a little more time with no oil for that to happen

Winters98GT · May 21, 2011

Sucks Tank. Mine just let go about 2 weeks ago.

Was that the stock oil pump?

midnightdriver · May 22, 2011

How many miles on the stock pump? That's too bad man, sorry for that but with a built block that thing is going to be evil. Because of you, I want a turbo.. stupid California would make me have to take it off every 2 years to smog though. Might be worth it

Flghtmstr1 · May 22, 2011

Winters98GT said:
Was that the stock oil pump?

What he said.

Sorry to hear about that, man. I was terrified of something like that happening to my brand new motor, so I plunked down the cash for a TSS billet oil pump. You can get them from Modular Head Shop, if you're interested.

tank_567 · May 22, 2011

Winters98GT said:
Sucks Tank. Mine just let go about 2 weeks ago.

Was that the stock oil pump?

Yep the stocker, 130,000+ miles on it. I just had the timing chains out and should have replaced it when I had the chance. On a lighter note the car did make over 500hp

Flghtmstr1 said:
Sorry to hear about that, man. I was terrified of something like that happening to my brand new motor, so I plunked down the cash for a TSS billet oil pump. You can get them from Modular Head Shop, if you're interested.

Im looking into getting the TSS or the MMR pump. Its going to be a few months before I get the cash to rebuild it, but my goals are a 550-650 street car.

slayerripkdc · May 22, 2011

Sorry to hear that! How long will you be out of the game for? Can't wait till you get it back together. Sick Car! I just picked up an 01 zx3 focus and I love it. Looks great with nice wheels and a tad lowered . Also get an average of 31mpg mixed highway and city.

trombonedemon · May 22, 2011

Was really hoping to hear that car, I'm in Raleigh on a permanant basis.

tank_567 · May 22, 2011

trombonedemon said:
Was really hoping to hear that car, I'm in Raleigh on a permanant basis.

I will have it up and running this year

tank_567 · Jun 18, 2011

UPDATE. Engine out, replacement on its way. Also new Milling oil pump w/ billet gears

Lame cell phone pics*

tank_567 · Jul 10, 2011

UPDATE

Well, I was going to install another stock 4.6 in the car, but got down to the wire for mustang week, and not going to make it. So i have decided to do a full out engine build. I just got a 5.4L block, 2v timing cover and forged crank, turbo is back from precision

-parts list

5.4L block
5.4L forged crank
Stock SOHC ports w/ 3 angle valve job
Stock PI cams
Eagle ESP H-Beam Connecting Rods
Probe Pistons (9.1 compression)
ARP main and head studs
Milling Billet oil pump

AND

TWO precision 62mm billet turbos

goal is to make 700rwhp on 93

sneaky98gt · Jul 10, 2011

tank_567 said:
...a 5.4L...

...TWO precision 62mm billet turbos...

View attachment 184519

lightblade · Sep 25, 2011

Updates?

tank_567 · Sep 27, 2011

lightblade said:
Updates?

The wife and I just had a baby lol, Still waiting on parts. I got rods, crank, block, heads. Working on getting pistons and cams right now.

View attachment 171742

Stumbaugh · Sep 27, 2011

Congrats on the new addition to the family.

BurningRubber · Sep 29, 2011

Congratulations to you guys.

Sucks it **** the bed, but it seems like you're going to make it better... just a little, haha.

This thread is inspiring. I'm in the middle of deciding on keeping my GT, turning it into the long-term project (long periods of downtime, putting money into it I really shouldn't be putting into it, breaking stuff, etc.) or selling for a newer Mustang... but this thread makes me want to keep it and go for my original goal of a nice single turbo setup.

tank_567 · Jan 20, 2012

IM BACK! So some updates, Im now an owner of a WEP block, 8 bolt crank and some rods/pistons(parts list below) Anyways, the block will be bored out .20 over(going to the machine shop tomorrow) and will run stock heads and cams, see how far I can take them before the need to blow $3,000 bucks for upgrades. Team PCM will be doing the engine build, more info to come in the following weeks, stay tuned!

-Ford Racing Aluminum Block, Bored .20 over
-CP Pistons S 16cc .20-over
-Manley H-Beam Connecting Rods w/ ARP bolts
-4.6 8 bolt crank
-MMR main side bolts
-Melling Oil pump
-New goal is 600rwhp on stock heads and cams

PS, 5.4 and most of the parts in the post above have been sold.

Tank_567 Turbo build

tank_567

Active Member

sneaky98gt

tank_567

Active Member

SaleenGT2001

Well-Known Member

SaleenGT2001

Well-Known Member

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

midnightdriver

Active Member

Flghtmstr1

Member

tank_567

Active Member

slayerripkdc

trombonedemon

Well-Known Member

tank_567

Active Member

tank_567

Active Member

tank_567

Active Member

sneaky98gt

lightblade

Member

tank_567

Active Member

Stumbaugh

Member

BurningRubber

tank_567

Active Member

Similar threads

Tank_567 Turbo build

Active Member

Active Member

Well-Known Member

Well-Known Member

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Active Member

Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Member

Active Member

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency