Tapping Under Valve Covers, Sewing Machine Noise?

P

PCole

New Member

Nov 16, 2017

6

0

1

Nov 16, 2017

#1

• Nov 16, 2017

• #1

my 66 coupe, 351W has a tapping sound that we can't seem to cure? like said its like a fast sewing machine sound and to cure it we've redone the cam/lifters/roller tip rockers and adjusted the valves several times? it's a comp cam (hydraulic), trick flow roller rockers 1.6, alum heads, edelbrock intake, and still the tapping. it's not as bad while cold and gets more pronounced the hotter it get? and added the tall valve covers as to give the rockers the room to move. any ideas??? tks a lot

 

horse sence

15 Year Member

Nov 29, 1999

12,195

8,028

233

Wile Coyote's stunt double

Nov 16, 2017

#2

• Nov 16, 2017

• #2

Was it tapping befpre you did the valve covers ? The oil shield inside the valve cover may be hitting the rockers . If that is not it i would go through the valve adjustment prosses again

 

P

PCole

New Member

Nov 16, 2017

6

0

1

Nov 17, 2017

#3

• Nov 17, 2017

• #3

Yeah the oil shield isn't all that invasive and I went from big steel covers to the alum. tall versions. And going through the valve align again is on the list for this weekend. Have put about 500 miles on it since the new rockers, but still am not convinced it'll make any difference. Done this like 5 times. Just that sewing machine noise, can't handle it...lol

 

horse sence

15 Year Member

Nov 29, 1999

12,195

8,028

233

Wile Coyote's stunt double

Nov 17, 2017

#4

• Nov 17, 2017

• #4

Are they roller rockers ,and what type lifters?

 

P

PCole

New Member

Nov 16, 2017

6

0

1

Nov 17, 2017

#5

• Nov 17, 2017

• #5

Yes roller rockers, Trick Flow 1.6
And the lifters are Hydraulic Flat Tappet, in a 351W....still haven't adjusted the valves out again.

 

65Ccoderagtop

Member

Dec 27, 2015

30

2

18

Maryland

Nov 19, 2017

#6

• Nov 19, 2017

• #6

How thin a motor oil are you running ? Above 0 degrees 20w50 could be the cure you need..

These ran with leaded fuel to keep the valves from sticking. Are you on the original guides?

Products like lead additives and octane boosters could also help.

If I remember right , louder after it warms up means you need thicker oil.

 

P

PCole

New Member

Nov 16, 2017

6

0

1

Nov 19, 2017

#7

• Nov 19, 2017

• #7

I am running the conventional Valvoline 20w50 Racing Oil so I think I'm good there...would going with new rods and guides be something to do or would that not really affect the tapping noise?

 

65Ccoderagtop

Member

Dec 27, 2015

30

2

18

Maryland

Nov 19, 2017

#8

• Nov 19, 2017

• #8

Try a little penetrating oil on the guides and see if the sound goes away. Look for bad or bent stems. I think you problem is not letting the new or old work right. The lead really is needed for a stock head. After adjusting so many times , I think is worn parts or lubrication.

 

horse sence

15 Year Member

Nov 29, 1999

12,195

8,028

233

Wile Coyote's stunt double

Nov 19, 2017

#9

• Nov 19, 2017

• #9

If you are running Rhoades lifters or some type of anti pump up lifters they will clatter just like solid lifters do

 

Reactions: PCole

General karthief

wonder how much it would cost to ship you a pair

5 Year Member

Aug 25, 2016

27,868

10,542

203

polk county florida

Nov 23, 2017

#10

• Nov 23, 2017

• #10

Just a thought, or actually a couple questions
What cam (lift, duration and lsa)
Pistons?
Heads?
The reason I ask is because you could have valves touching the pistons, happend to me, sounded like a sewing machine like you discribe, not enough to bend anything

 

Reactions: PCole