• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Taurus electric fan speed? (for stangs w/taurus fans)

  • Thread starter Thread starter btsclan
  • Start date Start date Jul 3, 2008
B

btsclan

Member
Feb 22, 2004
64
0
6
Seattle, WA
Jul 3, 2008
#1
  • Jul 3, 2008
  • #1
I have heard that the electric fan out of a ford taurus has two speed settings, which speed should I have it on. I think right now its on the high speed which would take more juice to power.

I'm just trying to figure out why my volts are down when my fan is on even though I did the 3G install.

So which speed do you have your taurus fan set to?(for those who are using a taurus fan)

Thx
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 3, 2008
#2
  • Jul 3, 2008
  • #2
Many folks use high speed like you do. You could try using just low speed however, and see if it can keep up. You might find that on a really hot day with the AC on, your temps creep up.

For the charging, if the volts are low at any RPM, have the alt tested as it may have dropped a diode. If the volts only drop at idle, consider overdriving the alt.

A Delta Controller is a way to minimize the voltage drop (though if your fan needs to run at 100%, the power consumption will be similar to how it is now). It will help when temps are milder outside.

You could also wire the fan up so it uses both speeds. Low would be controlled with a thermoswitch and high would come on with AC, a second thermoswitch or manual switching.

Good luck.
 
H

HaynStang

New Member
Dec 16, 2006
124
0
0
Portland
Jul 4, 2008
#3
  • Jul 4, 2008
  • #3
I have mine wired to the high side running off a Flex a Lite variable speed controller (similar to the DCC). I haven't drove the car in anything warmer than 80* weather, so I don't think it's ever ran at full speed, but it's nice to know that it could if it needs to.

The variable speed controllers are really the way to go, but you can always try it wired to the low speed and see how it does. My fan doesn't even turn on most of the time if it's less than 70* out, and when it does turn on it usually runs at a low speed.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jul 4, 2008
#4
  • Jul 4, 2008
  • #4
I have mine wired up to a DPDT switch so it's all manual, not the best idea in case you forget to turn it on but I keep my eye on the temps all the time. If you're going over like 35mph you don't need the fan, me anyways, depending on your cooling system and front bumper anyways...On a humid day the temp creeps up on Low (in traffic) but on high it pulls it right down very quickly, on most days it will hover around 195 and 200 on low, since I have a 195 t-stat.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 4, 2008
#5
  • Jul 4, 2008
  • #5
I'm using mine on high speed as well, with a cheap temp controller (the kind with the copper probe that slips into the rad. hose). I don't have any crazy stereo stuff, but i do have 4 head lights and two 100w fog lights, and i can drive around all night with everything on and i don't have charging issues.


I would check your alt. and battery and see how they're performing. Also do you have the heavy gauge wires ran for the alt?
 
You must log in or register to reply here.

Similar threads

Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
598
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
F
AC Compressor Power & Contour Fans
  • Fri Guy
  • Aug 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
407
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 15, 2026
BoostedRed89gt
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
697
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Electrical Contour fans wiring
  • JD1964
  • Dec 3, 2023
  • Fox 5.0 Mustang Tech
Replies
15
Views
3K
Fox 5.0 Mustang Tech Jan 28, 2024
JD1964
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
138
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?