Tech Question about Auto to T-45

acura1073

New Member
Feb 7, 2010
8
0
0
I was talking to a shop about swap, I didnt have all answers that he was asking

1) the backing plate, protector plate behind the flywheel, can that be used or do i need a new one?
2) I will need to get a new Flywheel, should i use one from a used car or get a new one?
3) was thinking of just getting a "king cobra" clutch, but always heard about centerforce!, is it worth the extra 150+ dollars for a stage I or even a stage II?
4) can i use same starter?
5) some say i dont have to change computer, so what do i do with the wires for overdrive switch and harness on tranny?
6) 4.6l is 6 bolt right (98 mustang gt)?
7) tranny im getting is rebuilt and its set up with a mech speed drive thing, any thoughts about that for my year?
8) i didnt take my shifter off, but it looks like its on a plate that would come off and it would accom the t-45 shifter, is that true or do i have to cut?
9) other than pedal assemble off another 98 gt, cables, fork, pilot bering, crossmeber, can anyone think of anythign else i might be missing?

thank for reading my post :shrug::shrug::shrug::rlaugh::rlaugh:
 
1: I do not believe there is a difference between the auto/manual plate.

2: shop around and see which is cheaper. Note: a resurfaced flywheel is almost as good as a new one. Do you want to run an 10.5" or 11" clutch?

3: depends on your power goals. For stock or mild power, the stock clutch is best and will give the best drivibilty.

4: yes

5: If you do not get a manual PCM, there will be issues to deal with. Best to get the correct PCM.

6:98 is a Romeo 6 bolt crank.

7:if you do not get a year correct VSS sensor, you will regret it. The OSS sensor is NOT compatible with a VSS.

8:don't know.

9:clutch cruse control disengage switch, clutch cable, drive shaft?
 
Hey Greenscob..
im new to this forum, do i search the topic or do i search your name, does this forum list all your posting??

let me know, thanks for the info, look forward to reading it,
It does seem easy to do, but i want to cover all bases first before i start taking stuff apart and bla bla bla....
ok thanks all!!