TF or Edelbrock Elbow adapter AND EGR delete?

[Blackened302]

i'm currently running a fox-style setup (Explorer throttle body modifed to work) and am thinking about going back to the 94-95 setup (want my cruise control back, plus i like the look of the 94-95 homebrew cai's better than the fox setups) w/ a 65 or 70mm throttle body and the Trickflow or Edelbrock elbow adapter.

thing is, i deleted EGR (and smog) and see that the Trickflow and Edelbrock elbow adapters have the space for the EGR.

do they make a plate or something to delete this on the elbows?

thanks, guys.

 

[Stanger007]

I'm running a Wazee plate, but it would be simple to make if you have access to cut and drill some aluminum.

If you search eBay for "EGR Block Mustang", one will come up. If you read the auction, he has a plate for all applications.

Wes

 

[divit250r]

Actually, my cousin made a plate the first time he did it, then after he did some more work to the car, he just took the elbow off, used a large pipe tap and a plug and sealed it up that way. It does look better now, no extra plate and hardware sticking off the side of the elbow and all.

 

[Red1990Lx]

I thought with the fox swap you could still run the Cruise Control without any problems. Was I informed wrong or something.... I was going to do the fow TB swap amongst other things this winter. If thats the case than I'll have to throw all of my crap that I have been slowly accumulating on e-bay.....

 

[sn-95matt5-0]

wat all stuff have you got collected....before you ebay it send me a pm. i may need some of it


i've read that the fuel pump block off plate for a 351c is a perfect fit. i bought one from o'reileys for 8 bucks and it looks like it will fit i'm just waiting for a chance to put it on