TFS intake and a throttle body

[302fordracer]

Ok I am installing my trickflow intake and some one told me that it isn't going to run right unless I upgrade my throttle body as well...they say thatn the car will lack power....? I do not have the money for the throttle body....I barely had money for the intake....I just moved out of the parents house and bills are kinda tight but since I already had the manifold I decided to get it put in....I would do it myself but time is an issue...i'm always working now...so will the car run good and not lack power if I run the TFS street heat manifold on a stock throttle body?

 

[Yellow302]

Check my sig..

runs great with stock MAF and TB

have a 75MM maf on there and the stocker feals much stronger.

i do have a FPR on there set at 40 right now. You might need a little more fuel to make her run perfect.

 

[VibrantRedGT]

It will run fine with the stock TB. Get it one when money permits.

 

[302fordracer]

thanks guys you're awesome...

 

[Grn92LX]

Run the stock TB until you upgrade to good heads/cam, then put on a 75mm and be done with it!

 

[AznStanger3v]

Run the stock TB until you upgrade to good heads/cam, then put on a 75mm and be done with it!

75mm is a little hefty for a street car. i think with hci, 70mm is more than enough air. but, my $.02

 

[Grn92LX]

Internet myth, young grasshopper talk to ed curtis and other knowledgabe cam/engine guru's and you'll see what works in the real world. No flame, just correcting an internet myth..