The 306 Dyno Challenge.

Lyncher · Sep 12, 2005

EDC said:
I'm no "punk kid" and could buy and sell you and your "engine" without batting an eye, so don't get "attitude" with me buddy.

If you can't handle the FACTS I posted then keep on dumping your "cash" into a loosing combination. It is "not" going to make the HP levels you are claiming.

Bottom line, if your engine builder told you you could obtain 450 HP with that head, cam and intake package, he lied and you flat out got taken.

Ed

90Notch · Sep 12, 2005

This car is built with no expense spared and Joe will even tell you that, he watched me go in there week after week dropping CASH in stacks to this dude!

Is this Dude willing to back his claims or just accepting your stacks of cash?

WildWillDavis · Sep 12, 2005

When I addressed the "punk kids" I don't recall addressing ED but if he thinks he is one I guess it would apply? Gee, I sure am sorry if an old man thinks he is a "punk kid" but don't get it twisted, I was not talking to ED. Nobody got taken here except by Hillard at CCM but I won that battle! If my motor builder thinks he needs to lie then so be it. I don't lie. I was just telling Joe what the builder said to me. I know there is no way my car makes 450 but being a "real man" I'm going to dyno it anyway.

stangnutlx · Sep 12, 2005

whos your engine builder Bennet racing or rick anderson?....

Lyncher · Sep 12, 2005

Brancer said:
When I addressed the "punk kids" I don't recall addressing ED but if he thinks he is one I guess it would apply? Gee, I sure am sorry if an old man thinks he is a "punk kid" but don't get it twisted, I was not talking to ED. Nobody got taken here except by Hillard at CCM but I won that battle! If my motor builder thinks he needs to lie then so be it. I don't lie. I was just telling Joe what the builder said to me. I know there is no way my car makes 450 but being a "real man" I'm going to dyno it anyway.

.

Ok...so basically your a dumbass who is betting 5,000 on something he knows is wrong...and that makes you a "real man" ...wow you should get your head checked. I didnt know being a jackass made you a real man?

WildWillDavis · Sep 12, 2005

I think I got it from Autozone? May have been Oriellys?

VibrantRedGT · Sep 12, 2005

I requested it in my first post about no bashing. We all know it's not capable at this time. The engine builder is one of the best in Florida. He himself has a 306 in his 93LX and it just ran a 9.94. Jason@Steeda saw it with his own eyes. The engine builder might have told Brancer that with a 100 shot it should be in the 450 range. I might have been presented to me wrong, hence the challenge. In any case he took and down the road he'll get it dynoed. We can all relax and get on with our lives.

Lyncher · Sep 12, 2005

VibrantRedGT said:
I requested it in my first post about no bashing. We all know it's not capable at this time. The engine builder is one of the best in Florida. He himself has a 306 in his 93LX and it just ran a 9.94. Jason@Steeda saw it with his own eyes. The engine builder might have told Brancer that with a 100 shot it should be in the 450 range. I might have been presented to me wrong, hence the challenge. In any case he took and down the road he'll get it dynoed. We can all relax and get on with our lives.

Sorry for the bashing...maybe I read it wrong but this is how I interprited it...

He knew it wouuldnt make 450 from the start but he still agreed to bet even though he knew he would lose 5,000 because he is a "real man" If that is true then I stand by what I said

WildWillDavis · Sep 12, 2005

No, really Joe it's ok to tell them I really got it at Autozone! I thinks it's and ATK reman right? LOL If they want to bash it's OK, I'm a man and they are the ones who look foolish. We are all out here to help each other and discuss new things but some people just want to make trouble and harass me. Joe told everyone we are close and he will not tolerate any flaming...so please only constructive comments pertaining to my lack of HP. Thanks....

STANGateURlilSS · Sep 12, 2005

450 at the wheels.. on spray.. yeah it might be possible.. depending on what jet size

Dbeck002 · Sep 12, 2005

Brancer said:
No, really Joe it's ok to tell them I really got it at Autozone! I thinks it's and ATK reman right? LOL If they want to bash it's OK, I'm a man and they are the ones who look foolish. We are all out here to help each other and discuss new things but some people just want to make trouble and harass me. Joe told everyone we are close and he will not tolerate any flaming...so please only constructive comments pertaining to my lack of HP. Thanks....

1. Men never have to admit they are "men".

2. We told you countless times that combination will never reach 450 HP crank or wheels however the f-ck you want to cook this pancake.

3. We are trying to help you get to 450 but you insist your combo will hit 450 without nitrous or boost and with a GT40 intake.

4. Be a man, shut the f-ck up and listen to the guru's. Sometimes shooting down your ego is what it's all about.

These mods

Production block bored to 306 cubic inches 0 decked.
Forged pistions
11:1 compression
Edelbrock RPM 6025's with I believe Stage I or II porting with bowl work.
GT 40 Intake with lowered gasket match porting.
Lunati 50017 camshaft I believe straight up.
Scorpion 1.6 rockers.
70 MM Throttle body.
80 MM Mass Air
30Lb injectors
1 5/8 Long Tubes
2.5 inch H pipe
2.5 inch 3 Chambers dumped
No underdrive pulleys
Timing at 14 degrees I believe
No Tuning device

= 330 RWHP

WildWillDavis · Sep 12, 2005

Please Dbeck go back to school and learn how to read. I KNOW IT WILL NOT MAKE 450 BUT I AM GOING TO DYNO IT ANYWAY.... Besides that I'm not going to dyno a pancake it will actually be car! Your alittle late on the bash fest, you should go kick your dog or perhaps walk out of you trailer with your wifebeater on and live up to your family creed! Thanks for the input schmuck!!!

stangnutlx · Sep 12, 2005

i have a bigger cam and better heads on my 306 and ill never see 450rwhp maybe with a 100shot but who knows....

WildWillDavis · Sep 12, 2005

FYI, my jets are slightly larger than 100. It understandable that most would assume a 100 shot given the comp. BTW thanks for not bashing me stangnutlx. Some people do understand english.

SharkBait · Sep 12, 2005

Brancer said:
Some people do understand english.

Que, no hablo.

j/k

WildWillDavis · Sep 12, 2005

Exactly, that's what it is starting to feel like.

stangnutlx · Sep 12, 2005

Nah not gonna bash you!! im building a hefty 306 myself so im curious aswell. gonna be N/A not sure about spray right now... That road is too far away to concentrate on.. And the comment i made about who was building your engine Bennet racing or rick anderson i wasnt trying to be an ass i was merely asking a question but thanks for your snide autozone comment!!!

WildWillDavis · Sep 12, 2005

Sorry I was not trying to be an ass. I had a man in south Florida build it who's name shall remain a mystery but I will tell you this, my motor has held strong for a very hard 20K miles. I have RUN from FL to IA most all of these miles. These are what I refer to as "White lightning miles" LOL. All in all I am very pleased with the performance of my car, I have way to many mods to list but the motor is one. Complete QA1 suspension. I had my friends at Mosier build me a bulletproof 8.8 with all the goodies. Maybe we could discuss this another time? Is your motor being built now or are you sourcing it out?

Dbeck002 · Sep 12, 2005

View attachment 504101

Dbeck002 · Sep 12, 2005

By the way, I live in south florida too.

Looks like we are trailer park neighbors!!!

Good luck with the uber motor!

The 306 Dyno Challenge.

Lyncher

New Member

90Notch

WildWillDavis

Member

stangnutlx

New Member

Lyncher

New Member

WildWillDavis

Member

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

Lyncher

New Member

WildWillDavis

Member

STANGateURlilSS

Dbeck002

New Member

WildWillDavis

Member

stangnutlx

New Member

WildWillDavis

Member

SharkBait

New Member

WildWillDavis

Member

stangnutlx

New Member

WildWillDavis

Member

Dbeck002

New Member

Dbeck002

New Member

Similar threads

The 306 Dyno Challenge.

New Member

Member

New Member

New Member

Member

"STANGNET'S PENGUIN SMACKER"

New Member

Member

New Member

Member

New Member

Member

New Member

Member

New Member

Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency