Fox The Great Engine Bay Detailing Debate

Yeah, My intent was to gain insight as to how you guys clean (detail) a dirty engine bay. I've read tons of things and some say don't spray water, lightly mist, go at it with a pressure washer. Don't use chemicals, use chemicals. Cover this, don't worry about covering anything. Hot, cold, warm..etc.

Right now I want to get all the oil, dirt, and grime off so I can see what I'm working with. Then I'll worry about polishing and stuff like that.
 
Reactions: 1 user
I'm too afraid to spray a couple different chemicals on a hot engine and be comfortable
But when I lifted the hood at the end I was like --------->
one thing too about the shiny stuff on your engine parts is that it seems to attract dirt/dust some also after its clean
 
Well its the same stuff that goes on your tires, how long do they stay clean and shiny being on the road with dust and dirt v.s in a closed hood environment, cause after you shine the wheels up they don't form dust rings on the tires right after BTW the good stuff I used lasts way longer than the turtle wax foam on tires. Also I did not cover anything in my engine bay, I just didn't spray it directly on the alternator, belt, pulley groves etc. But I sprayed it everywhere else that you mentioned, sprayed it all, foamed up real good too, foam on top of foam
 
Last edited:
cool cool yeah i wont spray the connections , the electrical stuff directly and will skimp around them as best i can. I have alot of chrome accesories too so i wont spray that foam stuff on them cause that just means rewiping down all the chrome and actually i won't want to get the chrome wet if possible too so for me its a little more delicate
 
I take the easier route...

I don't let it get dirty!!
lol. Yeah i dont know about getting all that water over electrical stuff but then again if its not that dirty you shouldnt have to spray the water that hard or even really over the electrical stuff so i will see. I have wiped stuff down before and done a good job but alot of the harness looms and stuff that i couldnt get too still looked dirty so maybe i will give those areas the treatment of he hosing off and foam. Everything i can get foam on and dont have to clean off like the chrome stuff, ect., i will spray the foam on
 
Well, I've owned this car for almost a year and a half without ever cleaning under the hood. I've been too busy concentrating on other areas.
I can't put it off any longer at this point. Car show season is coming up and I'd like to enter a few