The rear seat delete is coming along as planned

The Green GT · May 13, 2006

I had a few delays, like not being able to find carpet, and not having enough room between the speakers for the port, but it will turn out much cooler because of this. Ill explain in the pics I have so far.

This is the first thing you need to remove.
View attachment 470173

There are two snaps under the seat part, just find them and push them back and pull the bottom part out. Then unbolt 5 (I think) bolts for the back part.
View attachment 470175

Now take all the rough measurements and cut out everything. I needed alot more wood than a normal RSD because of the speaker box Im putting on the back.
View attachment 470177

Then I painted it all black cause Im not carpeting the box (yet) or the bottom of the seat portion. (It will fold up for under seat storage )

Trim everything and make sure it fits right.
View attachment 470179

Then if you are adding speakers, cut the holes.
View attachment 470181

Then make sure they fit.
View attachment 470183

Here is where it started getting interesting. I didnt have enough room between the speakers for the port, so I cut this one. Im going to staple a piece of tan fabric that matches the interior. Then My grandfather will cut a Mustang out of a piece of 1/2 in plywood and Im gonna cover than in the same fabric and glue it to the back.
View attachment 470185

In this pic you can see the black box in the background and the carpet I chose. These are all taken with my camera phone so they areent great quality.
View attachment 470187

I will finish this today. Ill post pics of the finished product as soon as I can.

New Pics.

Carpeted the back part.
View attachment 470189

Put speakers in and back part in. Added a piece of tan "pleather" to fill in the hole I decided not to use. It actually looks pretty good.
View attachment 470190

Cut a running horese out of a piece of 1/4 inch plywood. Then covered it in the same tan "pleather"
View attachment 470191
View attachment 470193

The finished product. You can see the seams on the bottom where I decided to keep the side parts down. It works great and you can see the hinge AT ALL.

View attachment 470195

The Green GT · May 13, 2006

Does anyone hav a picture of the running horse so I can get a stencil to cut out the horse to put on my RSD?

mootang · May 13, 2006

I think Slow5.0 did that! try finding him or do a search on his name and see if you can find how he did it.

bigcat · May 13, 2006

View attachment 470169

View attachment 470171

gmkillr · May 13, 2006

You should have used MDF if your going to be using it for a speaker enclosure.

The Green GT · May 13, 2006

bigcat said:
View attachment 470166

View attachment 470167

Thank you. The second is exactly what I was looking for.

The Green GT · May 13, 2006

gmkillr said:
You should have used MDF if your going to be using it for a speaker enclosure.

I dont know what MDF is but I think mine will turn out oretty good. I want it to be loud, but not loud tto where you can hear me coming from a mile away. My exhaust already does that.

xr8d302 · May 13, 2006

Looking good! Why'd you have to remove your passenger seat?

gmkillr · May 13, 2006

MDF= medium density fiberboard
Thats what 99% of speaker enclosures are built from.
Its very strong and seals well.

xr8d302 · May 13, 2006

I used MDF in mine

bigcat · May 13, 2006

xr8d302 said:
Looking good! Why'd you have to remove your passenger seat?

so you have more room to crawl in and out of the back seat when doing measurements/template fitting......

xr8d302 · May 13, 2006

Oh ok....gotcha....

Zero Signal · May 13, 2006

No need for MDF. As a matter of fact, plywood has a better resonant characteristic for subwoofers than compressed-fiber types like MDF (as long as you use the right thickness). It's just ugly and harder to work with.

Is that shape going to the the port area? If so what Fs are you tuning the port to? Judging by the area of that opening, you will need a port too long to fit in the trunk to get it right. You may want to stick with a couiple 3" x 14" long pipes or something.

I had my first setup like yours with just one 12 with the port facing the trunk. It sounded great.

fox racer · May 13, 2006

whered you get that carpeting? i need black carpeting for my RSD.

HISSIN50 · May 13, 2006

Glad to see it's coming along nicely.
I thought it was a fun project.

John brought up something I always wondered. I dont know much about acoustics, but it seemed like plywood wouldn't 'absorb' as much of the hit as goo-goo MDF.

:OT John, is your site ever coming back? I still wanted to see more pics of your stereo stuff (particularily the rear deck/package shelf where you did all that stuff)?

fox racer · May 13, 2006

fox racer said:
whered you get that carpeting? i need black carpeting for my RSD.

Anyone? Home Depot and Kmart definitely dont have anyhitng usefull. Lowes maybe? any suggestions?

bigcat · May 13, 2006

i got some black carpeting from Walmart. it comes in a roll about 3 ft wide. i think it was only like $5 or $6.

The Green GT · May 13, 2006

fox racer said:
Anyone? Home Depot and Kmart definitely dont have anyhitng usefull. Lowes maybe? any suggestions?

Try the car audio stores. Thats where I got mine, anf the one I went to had a good bit of colors to pick from. But its $12 a yard and 3 ft wide.

As for the project, well its still not done but the back part with the speakers is in. All I have left it to put the bottom part in. I cut the sides off so they can be flush with the moulding. So I have one part that comes up and there is about 6 inches on each side that will stay down. All I have to do is mount the hinge, and fab up some brakets for the outside peices. I had to scratch the box part cause after doing some thinking and re-thinking, I just couldnt get it to work how I wanted it to. So the triangular hole has a piece of "pleather" that I bought from wal-mart stapled on the back side and its the same color as my seats. So it looks pretty cool. I also cut a running mustang out of a piece of 1/4 in ply wood and Im gonna either wrap that in the pleather (which I doubt) or paint it the color of my car, or silver and mount it under the speakers.

I would post some pics but Im not on my computer. In fact Im on 56k.

donjohn · May 13, 2006

go to a fabric store for fabric man, that's the BEST place, they even have mesh to recover speakers with (like the rears in verts)

of course, i know ernan bought a roll of black carpet at Walmart

xr8d302 · May 14, 2006

The Green GT said:
In fact Im on 56k.

JT, you are no longer alone in having the slow internet....

wow...56k must really suck on some of these threads

The rear seat delete is coming along as planned

The Green GT

No 13 year olds are safe around me.

The Green GT

No 13 year olds are safe around me.

mootang

New Member

bigcat

start with the upper hole, and if more traction is

gmkillr

The Green GT

No 13 year olds are safe around me.

The Green GT

No 13 year olds are safe around me.

xr8d302

I bought a 27" monitor to compensate for my lack o

gmkillr

xr8d302

I bought a 27" monitor to compensate for my lack o

bigcat

start with the upper hole, and if more traction is

xr8d302

I bought a 27" monitor to compensate for my lack o

Zero Signal

Active Member

fox racer

Member

HISSIN50

"How long does it take to get help in here?

fox racer

Member

bigcat

start with the upper hole, and if more traction is

The Green GT

No 13 year olds are safe around me.

donjohn

New Member

xr8d302

I bought a 27" monitor to compensate for my lack o

Similar threads

The rear seat delete is coming along as planned

No 13 year olds are safe around me.

No 13 year olds are safe around me.

New Member

start with the upper hole, and if more traction is

No 13 year olds are safe around me.

No 13 year olds are safe around me.

I bought a 27" monitor to compensate for my lack o

I bought a 27" monitor to compensate for my lack o

start with the upper hole, and if more traction is

I bought a 27" monitor to compensate for my lack o

Active Member

Member

"How long does it take to get help in here?

Member

start with the upper hole, and if more traction is

No 13 year olds are safe around me.

New Member

I bought a 27" monitor to compensate for my lack o

Similar threads

Privacy & Transparency

Privacy & Transparency