The time has come for heads

thegreentaco

Member

Feb 25, 2006

40

1

9

Sacramento

Nov 26, 2006

#1

• Nov 26, 2006

• #1

Well just looking for any suggestions on a set of heads. I have been looking at the AFR 205's but dont know the streetability of them on a N/A motor. I plan on a power adder in the future so I am split between the 185's and the 205's. I just don't want to end up with one wishing I had picked the other. Lots of money to spend so just want to make sure I make the right decision.
-Daniel

 

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

Nov 19, 2005

815

5

18

mooresville, nc

Nov 26, 2006

#2

• Nov 26, 2006

• #2

wityh your motor i would get the 205s and if its a pig than just deal with it until you get the power adder

 

thegreentaco

Member

Feb 25, 2006

40

1

9

Sacramento

Nov 26, 2006

#3

• Nov 26, 2006

• #3

ya the thing is after this little $2K purchase, it will be awhile before I get a turbo, and I have to drive this thing everyday. Is there anyone out there running 205's on the street with a non boosted or stroked 351?

 

FastDriver

I was uncomfortably high & wearing a helmet

SN Certified Technician

Sep 5, 2001

6,076

2,679

224

Vass, NC

Nov 26, 2006

#4

• Nov 26, 2006

• #4

thegreentaco said:

I just don't want to end up with one wishing I had picked the other. Lots of money to spend so just want to make sure I make the right decision.
-Daniel

Click to expand...

Then get the 205s. They'll be fine on the street, and you'll never look back.

They won't pass emissions, though.

Chris

 

thegreentaco

Member

Feb 25, 2006

40

1

9

Sacramento

Nov 26, 2006

#5

• Nov 26, 2006

• #5

FastDriver said:

They won't pass emissions, though.

Click to expand...

luckily tweecer lets me trim fuel in the parking lot before the smog Engine barely runs but produces as much emissions as a honda

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Nov 26, 2006

#6

• Nov 26, 2006

• #6

thegreentaco said:

luckily tweecer lets me trim fuel in the parking lot before the smog Engine barely runs but produces as much emissions as a honda

Click to expand...

thats great haha . . . those heads are just a tad too big, but look at this way, you will have room to go if you ever decide to stroke it more and if you are spinning enough rpm those heads will be fine even with the amount of displacement you have now. I wish i had the money and i would convert my 331 to a solid roller and slap a set of 205s on there and spin it 8k rpm