I am not opposed to doing hydroboost setup. I also thought about manual brakes, but wasn't sure how difficult it will be to press pedal in when braking. I plan on running rear 15x10 wheel 21.5mm offset with 6.25" back spacing. I think the axles I purchased are stock length, just in 5 lug form. Front wheels are 15x3.5 with -28.7mm offset and 1.2" back spacing. I'm willing to swap out whatever I need to to make it right. This will be mostly street driven. Not sure if 94/95 spindles or 96-up would be better in this case either.