These parts from a blower setup too much for a N/A motor?

astronut1885

Founding Member

Jan 31, 2002

1,899

4

39

Assonet, MA

Oct 20, 2008

#1

• Oct 20, 2008

• #1

Hi guys. I'm thinking about ditching my FRPP blower that has been waiting for install, but keeping some of the supporting parts I had bought for it. I already have a SVT Focus fuel pump, Lightning MAF, 75mm TB, and a set of 30# injectors sitting next to it. Would these pieces be too much for a full bolt-on 2v? I plan on adding the TB with a plenum, and eventually going with heads/cams, but would those injectors be too big, or just fine with room to grow?
Thanks!

 

SADL-UP

Member

Jun 19, 2005

42

1

8

Massachusetts

Oct 20, 2008

#2

• Oct 20, 2008

• #2

If you plan on going the heads/cams route, then I would defintely hold on to those parts. With the setup in my sig. and a svt focus pump, the stock injectors were at the upper limit of what they can spray. I should really upgrade to 30 lb injectors or at least some 24s.

 

astronut1885

Founding Member

Jan 31, 2002

1,899

4

39

Assonet, MA

Oct 20, 2008

#3

• Oct 20, 2008

• #3

Good to know.

 

S

Smokeurhonda

New Member

May 1, 2003

457

0

0

Maryland

Oct 20, 2008

#4

• Oct 20, 2008

• #4

you can never go too big with fuel stuff as long as the car is tuned for those componets.

 

bhuff30

Founding Member

Dec 11, 2001

6,037

35

129

Olathe KS

Oct 20, 2008

#5

• Oct 20, 2008

• #5

Nope, certainly no reason you can't use these parts. Idle quality can suffer with huge injectors, but we are talking about 100+lb/hr injectors, so you'll be fine at 30lb/hr.