• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

This problem I'm having is getting really anoying.

  • Thread starter Thread starter Red Lx
  • Start date Start date Mar 7, 2007
R

Red Lx

New Member
Dec 29, 2003
8
0
0
Mar 7, 2007
#1
  • Mar 7, 2007
  • #1
Hey guys....
I'm new to the forum. I've had two Stangs since high school. A beautiful white 92 LX 4 banger....i know i know....and my current one..an 88 Black 5.0. I'm having a big problem with my 88. Every now and then I get a miss fire (or back fire, it's coming up through the intake.) It comes and goes...but latley it's getting bad. I checked the fuel press...it's definitly low. I replaced the press regulator because it wasnt holdin any fuel press with the ignition off. That didnt help the low fuel press problem. I checked for leaks and have none. I also checked for vacuum leaks and have none. Could it be a bad fuel pump or relay? I know it's definitly starvin for fuel. Any help would be appreciated. Also it really dosent want to move out of its own way when this happens. It just bogs down so bad. It's an all original car (hopefully not after this summer) With just a flowmaster after cat (of course). Thanks again.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 7, 2007
#2
  • Mar 7, 2007
  • #2
Any codes? Lack of fuel pressure often leads to an O2 rich adaptive limit code. While retrieving codes, run a cylinder balance test to see if the computer can pick up which cylinder is missing.


A fuel pump failing is more likely than a FPR. Can you watch fuel pressure while you drive? In my experience, when a fuel pump is crapping out because of a weak diaphram, as the pump gets hotter (more run time in a given driving session), the pressure drops. Once the car starts to miss, it's a couple minutes or less before it stalls and won't restart.

Good luck.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Mar 7, 2007
#3
  • Mar 7, 2007
  • #3
Run the check engine codes

'88 5.0's do not have working check engine lights, so you will never know when a code is stored
 
You must log in or register to reply here.

Similar threads

J
Having fuel issues
  • Jbands2v
  • Nov 2, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
102
SN95 4.6L Mustang Tech Yesterday at 5:24 PM
Mcmahst
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
573
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2026
Ryu
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?