those running an interceptor II

[mustangcobra93]

could you take a pic of your map sensor harness for me focusing on the wires coming off of it and going into the crane box.

you can send them to

[email protected]

 

[ss93cobra]

Did you try going to www.cranecams.com and click on the technical help section, choose ignition, timing retartd, etc. ?

 

[dcarlson]

Mine is under the seat. What do you need to see?

 

[mustangcobra93]

Did you try going to www.cranecams.com and click on the technical help section, choose ignition, timing retartd, etc. ?

crane doesn't support the interceptor anymore.

 

[mustangcobra93]

Mine is under the seat. What do you need to see?

I sent you a pm, but thought I would post her too to give a little more detail. I am interested to see what wires are coming from the map sensor plug leading into the crane box. There should be a pink/brown, pink/yellow, and pink/purple wires. The connector is a 3 prong type thing. I want to know what wire is coming from each prong.

 

[ss93cobra]

crane doesn't support the interceptor anymore.

Ah, sorry. I should have checked their site before I opened my mouth.

 

[dcarlson]

I run a copper tube from the manifold all the way to the boost sensor under the seat. I'll have to take the seat out, which means getting under the car to take the nuts off the subframe cross braces. Give me a couple of days and I can get to it.