Anyone here have issues with strut shaft ending up to close to the edge of the opening in the strut tower? I see not much more than 1/8"-1/4" of clearance at the back/outside portion of the tower opening and bottom plate. Which seems to prevent the bumpstop from going all the way up to the bottom plate.
Alignment is all in the green. Maybe its the coils as they are 2" drop, struts are Tokiko's. The top plates are in the positive position. The spacers are right.
Alignment is all in the green. Maybe its the coils as they are 2" drop, struts are Tokiko's. The top plates are in the positive position. The spacers are right.